Samsung RF268ABWP User Manual (user Manual) (ver.0.6) (English) - Page 15

Adjusting The Doors

Page 15 highlights

01 SETTING UP ADJUSTING THE DOORS After putting the doors back on the refrigerator, make sure the refrigerator is level so that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. For example, when the left side is lower than the right side, insert a flat-blade screwdriver(-) into a notch on the left control lever, and turn it counterclockwise to level the door. Turn it clockwise to lower the refrigerator and counterclockwise to raise it. Both control levers must be touching the floor to avoid possible personal injury or property damage CAUTION because of tipping. We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. flat-blade screwdriver(-) Control Lever Control Lever flat-blade screwdriver(-) Setting up _15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Setting up
_15
01 SETTING UP
ADJUSTING THE DOORS
After putting the doors back on the refrigerator, make sure the refrigerator is level so that you can make final
adjustments.
If the Refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture
condensation and increased energy bills.
For example, when the left side is lower than the right side, insert a flat-blade screwdriver(-) into a notch on the
left control lever, and turn it counterclockwise to level the door.
Turn it clockwise to lower the refrigerator and counterclockwise to raise it.
Both control levers must be touching the floor to avoid possible personal injury or property damage
because of tipping.
CAUTION
Control Lever
flat-blade
screwdriver(-)
flat-blade
screwdriver(-)
Control Lever
We do not recommend making small adjustments with the control lever. Instead, refer to the next
page for the best way to make minor adjustments to the doors.