Samsung RF26HFPNBSR Quick Guide Ver.1.0 (English) - Page 7

2. Setting up your French Door Refrigerator Selecting the best location for the Refrigerator • A location with easy access to a water supply. • A location without direct exposure to sunlight. • A location with a leveled floor. • A location with enough space for the refrigerator doors to open easily. • A location that allows sufficient space to the right, left, back and top for air circulation. • A location that allows you to move the refrigerator easily if it needs maintenance or service. 2 i2ncinhecshes 2 inches 2 inches 33¾3/4inincchheses B A E C Model RF261B**/RF260B**/ RF26H** Depth "A" 33 27/32" (860mm) Width "B" 35 25/32" (909mm) D Height "C" 68 3/8" (1737mm) Overall Height "D" 70" (1778mm) Depth "E" 36 7/32" (920mm) • Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. • Do not install the refrigerator where the temperature will go below 50ºF (10ºC). • Do not locate the refrigerator where it may become wet. • When moving your refrigerator To prevent floor damage, be sure the front adjusting legs are in the up position (above the floor). FLOORING For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator. To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving the refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.