Samsung RF26VABBP/XAA User Manual (user Manual) (ver.0.4) (English) - Page 11
disassemble the frezer drawer, upward at the same time.
View all Samsung RF26VABBP/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
01 SETTING UP disassemble the freezer drawer 1. P ush the upper drawer until it reaches to the cabinet rear wall. 2. R emove the tilting pocket( 1 ) by pulling on both brackets( 2 ) upward at the same time. 3. T ake out the lower basket( 3 ) by lifting the basket up from rail system. 4. R emove four 10mm hex-head bolts from both sides. SlotSlot 1 2 3 5. L ift the freezer door up from the rails. setting up _11
setting up
_11
4. Remove four 10mm hex-head bolts from both sides.
5. Lift the freezer door up from the rails.
2. Remove the tilting pocket(
1
) by pulling
on both brackets(
2
)
upward at the same time.
3. Take out the lower basket(
3
) by lifting the basket up from
rail system.
1. Push the upper drawer until it reaches to the cabinet rear wall.
DISASSEMBLE THE FREEZER DRAWER
1
2
3
01 SETTING UP