Samsung RF28JBEDBSR User Manual - Page 24
Using The Ice Off, Function
View all Samsung RF28JBEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
check the water level Test button • Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice may jam the bucket. • When you press the Test button, you will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button. • The chime sounds automatically again to let you know the ice maker is working well. • Replace the ice bucket. If There is a Power Failure If a power failure occurs, ice cubes may melt then freeze together when the power comes back on, causing the dispenser to be out of order. To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water. After you dump the ice from the ice bucket, you should press the dispenser lever once with the 'Water' or 'Ice Type' function ON. The ice maker will make new ice faster after you return the ice bucket to the refrigerator. Ice Making To fill the ice bucket to maximum capacity after installation, follow these steps: 1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). - Waiting 24 hours will allow your ice maker to cool properly. 2. Dispense 4 to 6 ice cubes into the glass. 3. After 8, and then 16 hours, dispense a full glass of ice. CAUTION • To clean the ice bin/bucket, wash with a mild detergent, rinse well, and dry thoroughly it. Do not use harsh or abrasive cleaners or solvents. • When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced. If you use all the ice at once, you must repeat Steps 2 and 3 on the previous page. However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production. USING THE ICE OFF FUNCTION When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice cubes may clump together, making it difficult to remove them. To remove the ice bucket safely and avoid injury, hold the bottom of the bucket with one hand and the side of the bucket with the other. Then, lift up on the ice bucket, and pull it straight out. To put the ice bucket back in, push it firmly straight back. If the ice bucket is not pushed firmly into place, ice in the bucket can melt. If the bucket does not fit, turn the helix 90 degree (see the last illustration on the right, below) and try again. English - 24 DA68-02952B-04.indb 24 2016. 3. 30. �� 1:33