Samsung RF28T5021SR/AA User Manual - Page 40
The AutoFill Pitcher indicators, If the Lock Indicator
View all Samsung RF28T5021SR/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Operations AutoFill Pitcher (RF28T502*** model only) If the Lock indicator ( ) is off, press AutoFill Pitcher turn AutoFill Pitcher on. Then, open the left door of the fridge and insert the water tank. Close the door and the water tank starts to fill with water up to the preset level. If the Lock Indicator ( ) is on, indicating the Lock function is active, press and hold Lock for 3 seconds to deactivate the Lock function. When the Lock indicator turns off, immediately press AutoFill Pitcher to turn AutoFill Pitcher on. Then, open the left door of the fridge and insert the water tank. Close the door and the water tank starts to fill with water up to the preset level. NOTE • When you turn off the Lock function, you must press AutoFill Pitcher within one minute or the Lock function will automatically reactivate. You cannot turn the AutoFill Pitcher function on if the Lock function is active. For more information on the Lock function, see page 43. To turn the function off, press the AutoFill Pitcher again. • By default, AutoFill Pitcher is disabled. Enable this function after you have installed the water line. • blinks if you open the door and remove or insert the pitcher with the AutoFill Pitcher function off. To stop the blinking, close the door or, turn the AutoFill Pitcher function on. • The AutoFill Pitcher indicators ( / ) blink if there is a leak. If this is the case, follow these steps. a. Open the rubber cap and drain water. b. When draining is complete, the indicators stop blinking and turn solid. c. Close the rubber cap. • If the indicators continue to blink, this might be a system failure. Contact a local service center. Operations 40 English Untitled-3 40 2020-06-10 2:57:18