Samsung RF4287HARS Quick Guide (easy Manual) (ver.1.0) (English) - Page 2

The Installation Space 2 inches 2 inches 33/4 inches Selecting the best location for the refrigerator • A location with easy access to the water supply. • A location without direct exposure to sunlight. • A location with a leveled fl oor. • A location with enough space for the refrigerator doors to open easily. • Allow suffi cient space for air circulation of the internal cooling system. If the refrigerator does not have enough space, the internal cooling system may not work properly. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fi xed wall, you need a minimum clearance is 3 ¾" (95mm) between the refrigerator and wall to allow the door to swing open. First thing! Make sure that you can easily move your refrigerator to its fi nal location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth of this Samsung French Door Refrigerator. B A Depth Width Height Overall Depth Model "A" "B" "C" Height "D" "E" CE D RF4287HA 33.78" (85.8 cm) 35.75" (90.8 cm) 66.19" 69.88" (168 cm) (177.4 cm) 36.22" (92 cm) • A llow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. • Do not install the refrigerator where the temperature will go below 50ºF (10ºC). • Do not locate the refrigerator where it may become wet. FLOORING CAUTION For proper installation, this refrigerator must be placed on a leveled surface of hard material that is the same height as the rest of the fl ooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 359lbs (165kg). To protect the fi nish of the fl ooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving a refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.