Samsung RFG293HABP User Manual (user Manual) (ver.0.3) (English) - Page 11
disassemble the frezer drawer, and pull it inward
UPC - 036725569652
View all Samsung RFG293HABP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
01 SETTING UP disassemble the freezer drawer 1. Take out the upper drawer by lifting it up. 2. Slightly pull the left support guard ( 2 ) to the left, allowing the pizza pocket ( 1 ) just enough room to slip off the hook. Then pull the pizza pocket ( 1 ) forward. 3. Lift up the bottom of the support guard ( 2 ) and pull it inward to remove it. Do it again, for right side. 2 Be careful not to break the parts. CAUTION 4. Take out the lower basket ( 3 ) by lifting the basket up from the rail system. 5. Remove 4 hex head bolts from both sides with a socket wrench (10mm). 1 2 Slot 3 6. L ift up the freezer door from the rails. Setting Up _11
01 SETTING UP
6. Lift up the freezer door from the rails.
1. Take out the upper drawer by lifting it up.
DISASSEMBLE THE FREEZER DRAWER
4. Take out the lower basket (
3
) by lifting the basket up from
the rail system.
3
2. Slightly pull the left support guard (
2
) to the left, allowing the
pizza pocket (
1
) just enough room to slip off the hook. Then pull
the pizza pocket (
1
) forward.
3. Lift up the bottom of the support guard (
2
) and pull it inward to
remove it.
5. Remove 4 hex head bolts from both sides with a socket
wrench (10mm).
CAUTION
Do it again, for right side.
Be careful not to break the parts.
2
2
1
Setting Up
_11