Samsung RFG293HARS Quick Guide (easy Manual) (ver.1.0) (English) - Page 3

Operating your French Door Refrigerator

Page 3 highlights

Operating your French Door Refrigerator usinG tHE ContRoL PAnEL & DisPLAy A B 1 2 3 4 5 6 Ice off Button Press the Ice Off button ( 1 ), if you don't want to make more ice. The icon ( stops making ice. ) will light up the Ice-Maker In this case of following, it is recommended to stop making ices. - There are enough ices in the ice bucket. - You want to save on water and energy. - Water does not supply to refrigerator. If ice maker function is ON, and water line is not connected, there will be a water valve noise from CAUTION back of unit. Press the Ice Off button until Ice Off indicator ( ) illuminated. If you want to fill the case ice cube to maximum capacity after installation, make sure to do the following steps. 1. Check the display whether the Ice off light ( ) is ON or OFF. If the Ice off light is ON, press the Ice off button ( 1 ) . 2. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24 hours will allow your ice maker to cool properly. • In case ice doesn't come out, press the test button located on the right side of ice maker. CAUTION • Do not press the test button continuously, when the tray is filled with ice or water. Water may overflow or ice jamming may occur. • Use only the ice maker provided with the refrigerator. • The water supply to this refrigerator must only be installed/ Check the water level connected by a suitably qualified person and connect to a protable water supply only. • In order to operate the ice maker properly, water pressure of 20~125psi is required. • Do not try to disassemble the ice maker. Test button

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

Operating your French Door Refrigerator
USING THE CONTROL PANEL & DISPLAY
1
2
3
4
5
6
B
A
Ice off Button
Press the Ice Off button (
1
) , if you don’t want to make more ice. The icon (
) will light up the Ice-Maker
stops making ice.
In this case of following, it is recommended to stop making ices.
-
There are enough ices in the ice bucket.
-
You want to save on water and energy.
-
Water does not supply to refrigerator.
If ice maker function is ON, and water line is not connected, there will be a water valve noise from
back of unit. Press the Ice Off button until Ice Off indicator(
) illuminated.
If you want to fill the case ice cube to maximum capacity after installation, make sure to do the following
steps.
1. Check the display whether the Ice off light(
) is ON or OFF. If the Ice off light is ON, press the
Ice off button (
1
).
2. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24hours will
allow your ice maker to cool properly.
• In case ice doesn’t come out, press the test button located on the right side of ice maker.
• Do not press the test button continuously, when the tray is filled with ice or water. Water may
overflow or ice jamming may occur.
• Use only the ice maker provided with the refrigerator.
• The water supply to this refrigerator must only be installed/
connected by a suitably qualified person and connect to a
protable water supply only.
• In order to operate the ice maker properly, water pressure of
20~125psi is required.
• Do not try to disassemble the ice maker.
CAUTION
CAUTION
Test button
Check the
water level