Samsung RS2577BB Owners Manual - Page 28

For Interior Model (Case 1) "_ Connecting to water supply line - Shut off the main water supply line and turn the Ice maker to the off position. - Locate the nearest cold drinking water line. - Follow the instructions in the ice maker installation kit. 1. Cold Water line 2. Pipe Clamp. 3.Copper (or Plastic) line 4.Compression Nut &Compression Sleeve 6.Shut Off Valve 7.Packing Nut. 6 54 Connect the water line to the refrigerator Slip the compression nut and plastic ferrule through the plastic tube. After inserting the sleeve, tighten the compression nut onto 1/4" compression fitting(union). @ Do n0t0vertighten thec0mPressi0 n NOTE nut | - Slip the compression ferrule and nut on copper (or plastic) tubing as shown. Tighten the comperssion nut onto the compression fitting(union). - Turn water on and check for any leakege. /'_CompressionaUtFerrule /.' Sleeve Compression fitting _ ,"; Ferrule ",, _.o°°" Compression Nut NOTE Waterline must be connected to drinkable water only (Case 2) \'7":< Check the water supply line Connect the water pipe with coupler and tap. - Close the main water tap. - Connect coupler "A" to the tap. - Every join should be protected with sealing tape. The water line must be connect- ed to the cold water piRe. I If it is connected to the hot I water pipe, it may cause the puri- I tier to malfunction. J If the c0uple r does not fit on th e curren t tap, go th e nearest auth0rised service dealer and purchase the right couplers fittings, 28 COUPLER"A" TAP