Samsung RS257BASB Owners Manual - Page 27

Connect, the water line to the refrigerator., Install the water filter.

Page 27 highlights

Connect the water line to the refrigerator. 1) Slip the compression nut through the provided plastic tubing. 2) Tighten the compression nut onto 1/4" comprression fitting. Refrigerator Ferrule s * , ii • • °" _Compresslon Nut(1/4) , ". (Provided) @ DOnot oVertighten the compression NOTE nut. • Using Copper Tubing - Slip the compression nut and ferrule on copper tubing as shown. • Using Plastic Tubing - Insert the molded end of the plastic tubing into the compression fitting. 3) Tighten the compression nut onto the compression fitting. 4) Turn water on and check for any leakage. ii *'" " 'I " ' ' CompressioFnitting ! 11" ,m (Provided) CompressioNnut(1/4") (Purchased) CoppeTr ubing (Purchased) PlasticTubing (Purchased) [ Household Water Line ] C_ Waterline must be connected tOdrinkable water only. NOTE Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect. Install the water filter. 1) As shown, the fixed cap separates from the refrigerator by rotating it counterclockwise. Remove the water filter from the box and put a month indicator sticker on the filter as shown, @ Keepthe cap(A)in a safe place for recapping, When NOTE you will not use the filter: i"---1 2) If the water filter was installed in March, put on the "SEP" sticker as the filter's life is usually six months. 3) Remove the protective cap then position and insert the filter as shown. 4) Slowly turn the water filter clockwise 90° to align the indication mark on the cover, locking the filter in position. Do not overtighten. SEPARATION ___ OF COVERFILTER _j STICKER (MONTHINDICATION) t ALIGNTHEINDICATIONMARK \WITHLOCKPOSITION. NOTE Please check that the indication line aligns with the lock position: 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Connect
the water line to the refrigerator.
1) Slip the compression
nut through the provided
plastic tubing.
2) Tighten the compression
nut onto 1/4"
comprression
fitting.
@
DOnot oVertighten
the compression
NOTE
nut.
Using Copper Tubing
- Slip the compression
nut and ferrule on cop-
per tubing as shown.
Using Plastic Tubing
- Insert the molded end of the plastic tubing
into the compression
fitting.
3) Tighten the compression
nut onto the com-
pression fitting.
4) Turn water on and check for any leakage.
C_
NOTE
Ferrule
Refrigerator
s*
,
i
i
°"
_Compresslon
Nut(1/4)
,
". (Provided)
ii
"
'
*'"
"
' Compression
Fitting
!
'
, (Provided)
I
11"
m
Compression
Nut(1/4")
(Purchased)
PlasticTubing
Copper
Tubing
(Purchased)
(Purchased)
[ Household Water Line ]
Waterline
must be connected tOdrinkable water only.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnect.
Install the water filter.
1) As shown, the fixed cap separates from the refrigerator by rotating
it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown,
i"---1
@
Keepthe cap(A)in a safe place for recapping, When
NOTE
you will not use the filter:
2) If the water filter was installed in March, put on the "SEP" sticker
as the filter's life is usually six months.
3) Remove the protective cap then position and insert the
filter as shown.
4) Slowly turn the water filter clockwise 90° to align
the indication mark on the cover, locking the filter in position.
Do not overtighten.
STICKER
(MONTH
INDICATION)
SEPARATION
___
OF
_j
t
COVERFILTER
ALIGNTHEINDICATIONMARK
WITHLOCKPOSITION.
\
Please check that the indication line aligns with the lock position:
NOTE
27