Samsung RS277ACBP/XAA User Manual (ENGLISH) - Page 28
Install the water filter., Connect the water line to the refrigerator., Secure the water line.
View all Samsung RS277ACBP/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
INSTALLATION OF THE WATER DISPENSER LINE Connect the water line to the refrigerator. - Remove the compressor cover of the refrigerator. WATER LINE - Connect the water line to the valve, as shown in the figure. - When connected, check if there is any leakage. If any, re-seal the connection. - Reattach the compressor cover of the refrigerator. CONNECTION NUT COMPRESSOR COVER OF REFRIGERATOR Secure the water line. - Using clip "A", fix the water line to the wall or the back of refrigerator. - When the water line is secure, make sure that the water line is not excessively bent, pinched or squashed. Complete the installation of the water supply line. CLIP A - Power on the refrigerator and press the lever on the right of the dispenser until water runs out through the water line and all air has been cleared from the water line. WATER LINE - At this time, check for any possible leakages at the joints in the water line. After securing the water line, move the refrigerator to the required location. Once the refrigerator is in position, do not move it if possible.. Install the water filter. 1) Remove the fixed cap (A) as shown. the fixed cap can be separated from the Water Filter Compartment by rotating it counterclockwise. Remove the water filter from the box and put a month indicator sticker on the filter as shown. Keep the cap(A) in a safe place for the future (to put it NOTE back in place when you don't need to use the filter). 2) If the water filter was installed in March, put on the "SEP" sticker. 3) Remove the Red protective cap from the filter, then position and insert the filter as shown. 4) Slowly turn the water filter clockwise 90º to align the indication mark on the cover, locking the filter in position. Do not overtighten. SEPARATION OF RED CAP (A) COVER FILTER STICKER (MONTH INDICATION) Please check that the indication line aligns with the lock position. NOTE 28 ALIGN THE INDICATION MARK WITH LOCK POSITION.