Samsung RSG257AAPN/XAA User Manual (user Manual) (ver.0.9) (English) - Page 17
Removing any residual matter inside the water, supply line after installing filter. - problems
View all Samsung RSG257AAPN/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
01 SETTING UP 4. Remove the filter cap and insert the filter into the filter housing. 5. Slowly turn the water filter 90º clockwise to align with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark with center of cover filter printing as illustrated. Remember, do not overtighten. 4 Cover filter Separation of red cap 5 Align the indication mark with lock position Removing any residual matter inside the water supply line after installing filter. Ice Water 1. Turn ON the main water supply. 2. Press the Water button and push the dispenser pad. 3. Run water through the dispenser until the water runs clear (approx. 3L). This will clean the water supply system and remove air from the lines. 4. Additional flushing may be required in some households. 5. Open the refrigerator door and make sure there are no water leaks coming from the water filter. A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation. setting up _17