Samsung S24C450D User Manual Ver.1.0 (English) - Page 83
Standard Signal Mode Table
View all Samsung S24C450D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor. If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. S24C450DW Resolution VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1280 x 720 VESA, 1280 x 800 VESA, 1280 x 1024 VESA, 1440 x 900 VESA, 1600 x 900 VESA, 1680 x 1050 VESA, 1920 x 1080 VESA, 1920 x 1200 Horizontal Frequency (kHz) 31.469 35.156 37.879 48.363 45.000 49.702 63.981 55.935 60.000 65.290 67.500 74.038 Vertical Frequency (Hz) 59.940 56.250 60.317 60.004 60.000 59.810 60.020 59.887 60.000 59.954 60.000 59.950 Pixel Clock (MHz) 25.175 36.000 40.000 65.000 74.250 83.500 108.000 106.500 108.000 146.250 148.500 154.000 Sync Polarity (H/V) 83 10 Specifications