Home » Samsung Manuals » Computer Monitors » Samsung S27A650D » Manual Viewer

Samsung S27A650D User Manual (user Manual) (ver.1.0) (English) - Page 82

Standard Signal Mode Table

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

9 Specifications 9.3 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor. If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by referring to the graphics card user manual. Resolution IBM, 640 x 350 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 800 VESA, 1280 x 800 VESA, 1280 x 960 Horizontal Frequency (kHz) 31.469 31.469 35.000 49.726 68.681 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 67.500 49.702 62.795 60.000 Vertical Frequency (Hz) 70.086 70.087 66.667 74.551 75.062 59.940 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.000 59.810 74.934 60.000 Pixel Clock (MHz) 25.175 28.322 30.240 57.284 100.000 25.175 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 108.000 83.500 106.500 108.000 Sync Polarity (H/V) 83 9 Specifications

Section	Page
Before Using the Product	2
Copyright	2
Icons used in this manual	2
Symbols for safety precautions	2
Cleaning	4
Cleaning	4
Securing the Installation Space	5
Precautions for storage	5
Safety Precautions	5
Electricity and Safety	5
Installation	7
Operation	9
Correct posture to use the product	13
Table Of Contents	14
Preparations	19
1.1 Checking the Contents	19
1.1.1 Removing the Packaging	19
1.1.2 Checking the Components	20
1.2 Parts	21
1.2.1 Frontal Buttons	21
1.2.2 Reverse Side	23
1.3 Installation	25
1.3.1 Attaching the Stand	25
1.3.2 Adjusting the Product Tilt and Height	26
1.3.3 Rotating the Monitor	26
1.3.4 Installing a Wall-mount Kit or Desktop Stand	27
1.3.5 Anti-theft Lock	28
1.4 \	29
Connecting and Using a Source Device	30
2.1 Before Connecting	30
2.1.1 Pre-connection Checkpoints	30
2.2 Connecting and Using a PC	31
2.2.1 Connecting to a PC	31
2.2.2 Driver Installation	33
2.2.3 Setting Optimum Resolution	34
2.2.4 Changing the Resolution Using a PC	35
2.3 Connecting Headphones (for the SA850 Model Only)	38
2.4 Connecting the Product to a PC as a USB HUB (for the SA850 Model Only)	39
2.4.1 Connecting a PC to the Product	39
2.4.2 Utilizing the Product as a USB HUB	39
2.5 Connecting the Power	40
Screen Setup	41
3.1 MAGIC	41
3.1.1 SAMSUNG MAGIC Bright	41
3.1.2 SAMSUNG MAGIC Color	42
3.2 Brightness	43
3.2.1 Configuring Brightness	43
3.3 Contrast	44
3.3.1 Configuring Contrast	44
3.4 Sharpness	45
3.4.1 Configuring Sharpness	45
3.5 Coarse	46
3.5.1 Adjusting Coarse	46
3.6 Fine	47
3.6.1 Adjusting Fine	47
3.7 Response Time	48
3.7.1 Configuring Response Time	48
Configuring Tint	49
4.1 Red	49
4.1.1 Configuring Red	49
4.2 Green	50
4.2.1 Configuring Green	50
4.3 Blue	51
4.3.1 Configuring Blue	51
4.4 Color Tone	52
4.4.1 Configuring the Color Tone Settings	52
4.5 Gamma	53
4.5.1 Configuring Gamma	53
Resizing or Relocating the Screen	54
5.1 Image Size	54
5.1.1 Changing the Picture Size	54
5.2 H-Position & V-Position	55
5.2.1 Configuring H-Position or V-Position	55
5.3 Menu H-Position & Menu V-Position	56
5.3.1 Configuring Menu H-Position or Menu V-Position	56
Setup and Reset	57
6.1 ECO	57
6.1.1 Eco Motion Sensor	57
6.1.2 Eco Light Sensor	59
6.1.3 Eco Saving	62
6.1.4 Eco Icon Display	63
6.2 Menu Transparency	65
6.2.1 Changing Menu Transparency	65
6.3 Language	66
6.3.1 Changing the Language	66
6.4 PC/AV Mode	67
6.4.1 Configuring PC/AV Mode	67
6.5 Auto Source	68
6.5.1 Configuring Auto Source	68
6.6 Display Time	69
6.6.1 Configuring Display Time	69
6.7 Key Repeat Time	70
6.7.1 Configuring Key Repeat Time	70
6.8 Customized Key	71
6.8.1 Configuring Customized Key	71
6.9 Off Timer On/Off	72
6.9.1 Configuring Off Timer On/Off	72
6.10 Off Timer Setting	73
6.10.1 Configuring Off Timer Setting	73
6.11 Reset	74
6.11.1 Initializing Settings (Reset)	74
INFORMATION Menu and Others	75
7.1 INFORMATION	75
7.1.1 Displaying INFORMATION	75
7.2 Configuring Brightness in the Startup Screen	75
Troubleshooting Guide	76
8.1 Requirements Before Contacting Samsung Customer Service Center	76
8.1.1 Testing the Product	76
8.1.2 Checking the Resolution and Frequency	76
8.1.3 Check the followings.	76
8.2 Q & A	79
Specifications	80
9.1 General	80
9.2 PowerSaver	81
9.3 Standard Signal Mode Table	82
Appendix	84
Contact SAMSUNG WORLDWIDE	84
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)	88
Terminology	89

Match case Limit results 1 per page

Specifications

9 Specifications

9.3

Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture

quality due to the nature of the panel. Therefore, a resolution other than the specified resolution

may degrade the picture quality. To avoid this, it is recommended that you select the optimum

resolution specified for the screen size of your product.

Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.

If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT

monitor before you exchange it with the LCD monitor.

If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will

automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal

modes, the screen may be blank with the power LED on. In such a case, change the settings according

to the following table by referring to the graphics card user manual.

Resolution

Horizontal

Frequency

(kHz)

Vertical

Frequency

(Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM, 640 x 350

31.469

70.086

25.175

+/-

IBM, 720 x 400

31.469

70.087

28.322

-/+

MAC, 640 x 480

35.000

66.667

30.240

-/-

MAC, 832 x 624

49.726

74.551

57.284

-/-

MAC, 1152 x 870

68.681

75.062

100.000

-/-

VESA, 640 x 480

31.469

59.940

25.175

-/-

VESA, 640 x 480

37.861

72.809

31.500

-/-

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 800 x 600

35.156

56.250

36.000

+/+

VESA, 800 x 600

37.879

60.317

40.000

+/+

VESA, 800 x 600

48.077

72.188

50.000

+/+

VESA, 800 x 600

46.875

75.000

49.500

+/+

VESA, 1024 x 768

48.363

60.004

65.000

-/-

VESA, 1024 x 768

56.476

70.069

75.000

-/-

VESA, 1024 x 768

60.023

75.029

78.750

+/+

VESA, 1152 x 864

67.500

75.000

108.000

+/+

VESA, 1280 x 800

49.702

59.810

83.500

-/+

VESA, 1280 x 800

62.795

74.934

106.500

-/+

VESA, 1280 x 960

60.000

108.000

+/+