Samsung SCB-2001 User Manual - Page 10

Introduction n Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. No. Function Description 1 ALARM OUT Alarm out port for motion detection. (Open collector type) 2 GND Grounding Port. 3 GND Grounding Port. 4 SHUTTER (S0) This is a port for selecting an external high speed shutter mode. If connected in LOW (0V), it will become ON inside. 5 SHUTTER (S1) This is a port for selecting an external high speed shutter mode. If connected in LOW (0V), it will become ON inside. 6 SHUTTER (S2) This is a port for selecting an external high speed shutter mode. If connected in LOW (0V), it will become ON inside. 7 5V OUT Power supply port for RS-485 JIG. Use within typical DC +5V 100mA This is a port for DAY&NIGHT conversion. 8 DAY/NIGHT IN High(DC +3V~+5V) : DAY(COLOR) Mode, Low(0V) : NIGHT(BW) Mode 9 RS-485 DATA- This is a port for connection to RS-485 DATA- signal line. 10 RS-485 DATA+ This is a port for connection to RS-485 DATA+ signal line. o SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value. cd (Up/Down) : By pressing this switch up or down, you can move up or down on the menu. ‹ : When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press this button. p Power Display LED When the power is normally connected, the red LED lights. q Video OUT Port This is connected to the Video Input Port of the monitor and it outputs the Video signals. r Power Connection Port This is connected to the Power cable. s GND This is a grounding port. 10 - DIGITAL COLOR CAMERA