Samsung SCB-3001 User Manual - Page 21

Operating Your Camera Notes • As the DIS function uses the digital zoom, the camera's resolution will decrease. • DIS doesn't operate when background illumination is too low. • DIS doesn't operate when object pattern is monotonic as like sky or white wall. C OMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device.  1) When the SPECIAL menu screen is displayed, press the Function Setup button so that the arrow indicates 'COMM ADJ'.  2) Set up the mode using the Function Setup button. COMM SETUP 1.CAM ID 1 2.BAUD RATE 9600 3.UART MODE 8-N-1 4.RET PKT ENABLE 5.DISP ID OFF 6.PROTOCOL SAMSUNG-T 7.RETURN ● CAM ID : Determines the camera's identification number (between 0 and 255). ● BAUD RATE :You can select 2400/4800/9600/19200/38400/57600 bps. ● UART MODE :You can select NONE, EVEN or ODD for the parity bits. ● RET PKT : D etermines whether to send a command back to the controller device when a communication control command is sent to the camera. ● DISP ID : Display camera title on top left corner of the screen. ● PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T, SAMSUNG-E , PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC) ● RETURN : S elect this to save the PRIVACY menu settings and return to the SPECIAL menu. COLOR CCD CAMERA 40 User Guide * Initial value of communication adjustment Item Camera ID BAUD RATE UART MODE Initial value 1 9600 8-NONE-1 PET PKT ENABLE LANGUAGE : You can select the menu language according to your requirements. RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup button depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu. NOT SAVE : Save the current settings and exit the MAIN SETUP menu. Power resets the camera settings to the previous mode except for Day/night mode. RESET : Resets the camera settings to the factory defaults. Communication, Language and Monitor settings are not initialized. COLOR CCD CAMERA 41 User Guide