Samsung SCC-B5368 User Manual - Page 24
Setup, R-gain, B-gain, Brightness, Night, Digital Zoom, On/off], Digital, Location, Detail, V-sync,
UPC - 836164369963
View all Samsung SCC-B5368 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
How to use OSD Menu • ATW1(Auto Tracing White Balance mode DIGITAL ZOOM ❖ 1): The camera can automatically adjust the color temperature in real time, according to RATIO < LOCATION > [X1.0] the ambient conditions. The color temperature ranges from approx. 2500K to 9300K. ❖ • ATW2: The color temperature ranges from approx. 2,000K to 10,000K. • AWC ( Auto White Balance Control): If you press the SETUP switch in the appropriate item ❖ position, Auto White Balance will perform once. • 3200K : Set color temperature to 3200K - LOCATION : If you press the SETUP switch in the • 5600K : Set color temperature to 5600K condition where the image is enlarged as much as the ratio setting, you can watch an invisible area of the ❖ - RED : Adjusts the strength of the red color. effective screen as well using the cdef switch. - BLUE : Adjusts the strength of the blue color. Note : - R-GAIN/B-GAIN : Enables you to set the current - If the digital zoom factor is set to larger than 1x, the FENCE color temperature manually. function will be deactivated. - BRIGHTNESS : Select a brightness level in The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration of the quality. switching from setting in DAY mode to setting in NIGHT mode. ❖ DETAIL [0~3] ❖ DIGITAL ZOOM [ON/OFF] Controls the horizontal or vertical distinction. You can set the digital zoom factor and position. ❖ V-SYNC [INT, LINE] ❖ If you press the SETUP switch with the DIGITAL Select the vertical sync mode for INT or LINE. ZOOM function set to ON, you will see the If you select INT, the camera will use the internal appropriate screen. synchronization. When the zoom factor and position are defined, the digital zoom function will operate. If selecting LINE, the camera will use the external power source frequency for the synchronization. You can adjust the LL-PHASE. 24 - DIGITAL COLOR DOME CAMERA Note : - Use of DC 12V will fix V-SYNC to INT, which can not be changed.