Samsung SCD-2020R User Manual - Page 17
English_17
View all Samsung SCD-2020R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
● CONNECTION When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) Resistance (Ǯ/m) Voltage Drop (V/m) #24 (0.22mm2) 0.078 0.028 #22 (0.33mm2) 0.050 0.018 #20 (0.52mm2) 0.030 0.011 #18 (0.83mm2) 0.018 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera. * Standard voltage for camera operation : DC 12V ±10% * There may be some deviation in voltage drop depending on the type of wire and the manufacturer. M Be sure to connect power only after all the installation is complete. Ground should be connected to the GND terminal. English_17
English_17
●
CONNECTION
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size
(AWG)
#24
(0.22mm2)
#22
(0.33mm2)
#20
(0.52mm2)
#18
(0.83mm2)
Resistance (
Ω
/m)
0.078
0.050
0.030
0.018
Voltage Drop (V/m)
0.028
0.018
0.011
0.006
As shown in the table above, voltage decreases as the wire gets longer. Therefore
use of an excessively long adaptor output line for connection to the camera may af-
fect the performance of the camera.
*
Standard voltage for camera operation : DC 12V ±10%
*
There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
Be sure to connect power only after all the installation is complete.
Ground should be connected to the GND terminal.
±
M