Samsung SCD351 Quick Guide (ENGLISH) - Page 9

Troubleshooting, Self Diagnosis Display in M.Cam/M.Player Modes SC-D353/D354/D355 only, Direct Print - sc d353 memory card

Page 9 highlights

Troubleshooting Troubleshooting ✤ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display Display Blinking Informs that... Action slow the Battery pack is almost discharged. Change to a charged one. Tape end! slow When the remaining time on the tape is about 2 minutes. Prepare a new one. Tape end! no the tape reached its end. Change to a new one. No Tape! slow there is no tape in Camcorder. Insert a tape. Protection! slow ....D slow L C R slow the tape is protected from recording. the Camcorder has some mechanical fault. moisture condensation has formed in the Camcorder. If you want to record, release the protection. 1. Eject the tape. 2. Set to OFF. 3. Detach the battery. 4. Reattach the battery. * If unresolved contact your local samsung service center. see below. Moisture Condensation ✤ If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the Camcorder is fitted with a moisture sensor. ✤ If there is moisture inside the Camcorder, (DEW) is displayed. If this happens, none of the functions except cassette ejection will work. Open the cassette compartment and remove the battery. Leave the Camcorder for at least two hours in a dry warm room. Self Diagnosis Display in M.Cam/M.Player Modes (SC-D353/D354/D355 only) Direct Print Related Messages Display Blinking Informs that... No Memory Card! slow There is no Memory card in the Camcorder. Memory Full! slow There is not enough memory to record. Action Insert a Memory card. Change to a new Memory card. Erase recorded image. Display Paper error No paper Paper Jam Ink error Explanation There is a problem with the paper. Paper is not correctly inserted or there is no paper. The paper jammed during printing. There is a problem with the ink cassette. No image! slow There are no images recorded on the Memory card. Record new images. No Ink Print error The ink cartridge is not inserted or is out of ink. Turn off the printer and turn it back on. Write protect! slow The Memory card is record protected. Release the write protect tab on the Memory card. File error You attempted to print an image that was made with another camcorder, has a different format, or was edited on a computer. Protect! slow When you try to delete to protected image. Cancel the protection of image. Read error! slow The Camcorder can not playback. Format a Memory card or insert Memory card recorded on this Camcorder. Write error! slow The Camcorder can not record. Format a Memory card or change to a new Memory card. Not Formatted! slow The Memory card needs to format. Format a Memory card. (see page 101) Now deleted... slow When progressing file delete. Wait until delete has been finished. Memory Card error! slow If inserted Memory Card is not recognized by the Camcorder. Eject and re-insert the memory card Try another Memory Card 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

9
Troubleshooting
Troubleshooting
Self Diagnosis Display in M.Cam/M.Player Modes (SC-D353/D354/D355 only)
Before contacting a Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
Moisture Condensation
If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder,
on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly.
To prevent possible damage under these circumstances, the Camcorder is fitted with a moisture sensor.
If there is moisture inside the Camcorder,
(DEW) is displayed. If this happens, none of the functions except cassette ejection will work.
Open the cassette compartment and remove the battery.
Leave the Camcorder for at least two hours in a dry warm room.
Direct Print Related Messages
There is a problem with the paper.
Paper is not correctly inserted or there is no paper.
The paper jammed during printing.
There is a problem with the ink cassette.
The ink cartridge is not inserted or is out of ink.
Turn off the printer and turn it back on.
You attempted to print an image that was made with another
camcorder, has a different format, or was edited on a computer.
Paper error
No paper
Paper Jam
Ink error
No Ink
Print error
File error
Display
Explanation
slow
slow
no
slow
slow
slow
slow
the Battery pack is almost discharged.
Change to a charged one.
When the remaining time on the tape
is about 2 minutes.
Prepare a new one.
the tape reached its end.
Change to a new one.
there is no tape in Camcorder.
Insert a tape.
the tape is protected from recording.
If you want to record, release
the protection.
moisture condensation has formed in
the Camcorder.
see below.
the Camcorder has some mechanical
fault.
1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If unresolved contact your local
samsung service center.
Tape end!
Tape end!
No Tape!
Protection!
....
D
L
C
R
Display
Blinking
Informs that...
Action
slow
There is no Memory card in
the Camcorder.
Insert a Memory card.
No Memory Card!
slow
There is not enough memory
to record.
Change to a new Memory
card. Erase recorded image.
Memory Full!
slow
There are no images recorded
on the Memory card.
Record new images.
No image!
slow
The Memory card is record
protected.
Release the write protect tab
on the Memory card.
Write protect!
slow
When you try to delete to
protected image.
Cancel the protection of
image.
Protect!
slow
The Camcorder can not
playback.
Format a Memory card or
insert Memory card recorded
on this Camcorder.
Read error!
slow
The Camcorder can not record.
Format a Memory card or
change to a new Memory card.
Write error!
slow
The Memory card needs to
format.
Format a Memory card.
(see page 101)
Not Formatted!
slow
When progressing file delete.
Wait until delete has been
finished.
Now deleted...
slow
Memory Card
error!
If inserted Memory Card is not
recognized by the Camcorder.
Eject and re-insert the
memory card
Try another Memory Card
Display
Blinking
Informs that...
Action