Samsung SCP-2120 User Manual - Page 31

Functional Description 16. Schedule Schedule enables you to schedule a sequencing action by day and time. Auto Run Mode Time SCHEDULE 30 SEC ➡ Schedule Set Sunday ON Monday OFF Tuesday OFF Wednesday OFF Thursday OFF Friday OFF Saturday OFF ➡ Schedule Set No START SEQ No 1 09:00 HOME 2 00:00 OFF 3 00:00 OFF 4 00:00 OFF 5 00:00 OFF 6 00:00 OFF Clear Select Day : At Auto Run, select SCHEDULE to set up each day of the week, as shown on the side picture. Select a day, change to ON, and then press Enter. Select Time : When turning ON a day, a timetable appears as shown on the side picture. (Up to 6 timelines can be selected for a day.) Select the beginning time and sequencing action to schedule the action. Notes • Auto mode is disabled when AGC is turned OFF. This function is only available when Color or B/W mode is selected. The camera time must be setup properly prior to using this option. If the camera does not perform a scheduled sequencing action, please reconfigure the camera time under OSD Setting > Others > Clock Setting (Refer to Page 71). SPEED DOME CAMERA 60 User Guide 17. Power On Resume and MD Dwell Time ▶ Main Menu/Sequence Setting Main Menu Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Password Setting Status Power On Resume :  This is useful when the power is disconnected and reconnected due to power failures or other power interruptions. If the camera was performing a sequence action prior to a power disconnection, the camera automatically resumes the action when the power is reconnected. ➡ Sequence Setting Preset Swing SEQ Group SEQ Tour SEQ PTZ Trace Auto Run Power On Resume ON Notes • 'Power On Resume' cannot resume a sequence action if the camera's internal battery is completely discharged after the camera was left without power supply for a long time. (The data of the sequence action, however, remains safe even if the internal battery is completely discharged.) SPEED DOME CAMERA 61 User Guide