Samsung SCX-3205 User Guide - Page 39

TCP/IP to change the assignment method to DHCP. • For the Static method If the IP address assignment method is Static, check if Static is shown in the window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Before entering the IP address for the machine, you must know the computer's network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. Example) If computer's network information is as below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Machine's network information should be as below: - IP address: 169.254.133. 43 (Use computer's IP address, with changed last three digits.) - Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.) - Gateway: 169.254.133.1 (Change the last three digits from IP address of your machine to 1.) 9. When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click Next. 10. Wireless Network Setting Complete window appears. Then, click Next. Select Yes if you accept the current settings and continue the setup procedure. Select No if you want to return to the beginning screen. Then, click Next. 11. Click Next when the Confirm Printer Connection window appears. 12. Select the components to be installed. Click Next. After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. 13. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and skip to step 15. 14. If the test page prints out correctly, click Yes. If not, click No to reprint it. 15. To register as a user of the machine in order to receive information from Samsung, click On-line Registration. 16. Click Finish. Installing the machine on an Ad-Hoc wireless network (Windows) If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an Ad-Hoc wireless network by following the simple steps below. Items to prepare Ensure you have next items ready. • Wireless network computer • Software CD provided with your machine • Wireless network machine • USB cable Creating the Ad-Hoc network in Windows When the items are ready, follow below steps: 1. Check whether the USB cable is connected to the machine. 2. Turn on your computer and the wireless network machine. 3. Insert the supplied software CD into your CD-ROM drive. • The software CD should automatically run and an installation window appear. • If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing "X" with the letter which represents your drive. Click OK. • If you use Windows Vista, Windows 7 or Windows Server 2008 R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing "X" with the letter which represents your drive and click OK. • If the AutoPlay window appears in Windows Vista, Windows 7 or Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control windows. 4. Select the Wireless Setting and Installation option. • Install Now: First you must configure the wireless network settings of your printer to print through wireless. • Wireless Setting and Installation: Configure the wireless network settings of your printer with a USB cable then install the printer driver. Press this button to set up the wireless connection if you have not set up the wireless connection before. 5. Read the License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 6. The software searches the wireless network. If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instruction on the window. 7. After searching the wireless network, a list of wireless network your machine has searched appears. If you want to use the Samsung default ad-hoc setting, select the last wireless network on the list, which Network Name(SSID) is airportthru and Signal is Printer Self Network. Then, click Next. If you want to use other ad-hoc settings, select other wireless network from the list. If you want to change ad-hoc settings click the Advanced Setting button. • Enter the wireless Network Name: Type in the SSID Wireless network setup (SCX-3205W(K))_ 39