Samsung SCX-6545N Service Manual - Page 229
Condition, Possible cause, Suggested solutions, PDF file as an image.
UPC - 635753618457
View all Samsung SCX-6545N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
CÓPIA NÃO CONTROLADA Alignment & Troubleshooting Condition Possible cause Suggested solutions Half the page is blank.(continue) The paper size and the paper size settings do not match. Ensure that the paper size in the printer driver settings matches the paper in the tray. Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use. The machine prints, but the text is wrong, garbled, or incomplete. The printer cable is loose or defective. Disconnect the printer cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer and try a print job that you know works. Finally, try a new printer cable. The wrong printer driver was selected. Check the application's printer selection menu to ensure that your machine is selected. The software application is malfunctioning. Try printing a job from another application. The operating system is malfunctioning. Exit Windows and reboot the computer. Turn the machine off and then back on again. Pages print, but are The toner cartridge is defective Redistribute the toner, if necessary. blank. or out of toner. If necessary, replace the toner cartridge. The file may have blank pages. Check the file to ensure that it does not contain blank pages. Some parts, such as the controller or the board, may be defective. The printer does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing. Incompatibility between the PDF file and the Acrobat products. Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options. Note: It Will take longer to print when you print a PDF file as an image. Your machine has an odd smell during initial use. The oil used to protect the fuser is evaporating. After printing about 100 color pages, there will be no more smell. It is a temporary issue. The print quality of The resolution of the photo is photos is not good. very low. Images are not clear. Reduce the photo size. If you increase the photo size in the software application, the resolution will be reduced. The machine prints, but the text is wrong, garbled, or incomplete. If you are under the DOS environment, the font setting for your machine may be set incorrectly. Suggested solutions: Change the language setting. Before printing, the machine emits vapor near the output tray. Using damp paper can cause vapor during printing. This is not a problem. Just keep printing. Service Manual 4-104 CÓPIA NÃO CONTROLADA Samsung Electronics