Samsung SE-S184 User Manual (user Manual) (ver.1.0) (English) - Page 27

Select Languages English Category DISC Usable Discs Interface Support ACCESS TIME (Random) Disc Diameter Interface Port CD-ROM DVD-ROM Setting Disc Labeling Best Time Normal Titles only Less than 4 min Less than 3 min Draft Less than 2 min Media Type DVD+R DVD+RW DVD+R DUAL DVD-R DUAL DVD-R DVD-RW Data Transfer Speed (Max) DVD-ROM(Single) DVD-ROM(Dual) DVD-RAM CD-ROM CD-R US-RW HS-RW CD-RW Buffer Memory Drive Installation Operating Environment Temperature Humidity Size(Width x Height x Length) Weight SE-S184M External DVD Writer DVD :DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM, DVD-Video, DVD+R (Dual), DVD-R (Dual), Light Scribe DVD±R , DVD-RAM CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CD-EXTRA, Portforio), Light Scribe CD-R 4.72 Inch or 3.15 Inch (120mm or 80mm) USB 2.0 110ms (Random) 130ms (Random) Titles and contents The entire label area (including graphics) Less than 9 min Less than 36 minutes Less than 7 min Less than 28 minutes Less than 4 min Less than 20 minutes Write Read CAV 18X (24.3MB/sec) CAV 12X (16.2MB/sec) Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec) Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec) Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec) CAV 18X (24.3MB/sec) CAV 12X (16.2MB/sec) Z-CLV 6X (8.1MB/sec) CAV 8X (10.8MB/sec) - CAV 16X (21.6MB/sec) - CAV 8X (10.8MB/sec) CAV 12X(16.2MB/sec) CAV 12X(16.2MB/sec) - CAV 48X (7.2MB/s) PCAV 48X (7.2MB/sec) CAV 40X (6.0MB/sec) Z-CLV 32X (4.8MB/sec) CAV 40X (6.0MB/sec) CLV 10X (1.5MB/sec) CAV 40X (6.0MB/sec) CLV 4X (0.6MB/sec) CAV 40X (6.0MB/sec) 2MB Horizontal / Vertical 41°F ~ 104 °F (5°c ~ 40°C) 10% ~ 80% (RH) 6.41 X 1.96 X 9.13 Inch (163 X 50 X 232mm) 1,200g Note Does not support DVD-R for Authoring. Cannot playback or record on both sides of a two-sided disc simultaneously. The read/write capacity of the supported discs depends on the condition of the disc and the recording format of the drive. Therefore, the read/write quality may not be perfect. Severe vibration or external impact may decrease the quality of printed images. Please firmly place the product onto the PC before use. In case of disk identification error message, thoroughly clean the surface of the disk where the label is presented and then start printing. The quality of the printed image cannot be ensured if printing an image on the area which is already used for printing. For more information on the writing and duplicating the Lightscribe disk label, install Nero software and refer to the HELP section.