Samsung SGH-A717 User Manual (ENGLISH) - Page 95
Select USB Mode
View all Samsung SGH-A717 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Configuring your Phone's USB Connection • Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or Other. • Home URL: enter the URL address of the page to be used as your homepage. • Gateway address: (wap1.x only) enter the gateway address of the proxy server. • Proxy address: (wap2.x and AT&T MMS) set the proxy server address and port. • Linger Time (Sec.): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time. • Advanced Settings: allows you to configure some of the IP-specific information: Static IP, Static DNS, Server information, and Traffic Class. - Static IP: specify if you want to manually enter an IP address. If you want the IP address to be automatically assigned by the server, remove the check mark. - Local phone IP: enter the IP address obtained from the network operator, if you checked the Static IP option. - Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. If you want the address to be automatically assigned by the server, remove the check mark. - Server 1/Server 2: enter the Domain Name Server (DNS) addresses. - Traffic class: select the traffic class. Note: The WAP settings may vary depending on the service provider. Configuring your Phone's USB Connection Your phone can connect to a PC via the USB cable (sold separately). The phone can be configured to open launch a default application when an active USB connection is detected. 1. Use the USB adapter cable to connect the handset to the target PC. When an active connection has been established, a USB icon ( ) appears on the phone. 2. When the Idle screen displays, press the Menu soft key. 3. Select Settings and press the Select soft key or the key. Select Connectivity. Highlight Select USB Mode and press the Select soft key or the key. Use the Up or Down Navigation key to highlight one of these options: • Media Player: sets the Media Player to launch as the default application when a USB connection is detected. This is the default application. • PC Studio: sets PC Studio to launch as the default application when a USB connection is detected. • Ask on Connection: requires the phone to present a "Select USB Mode" pop-up which requires you to assign a default USB application. Changing Your Settings 92