Samsung SH-S222A User Manual (ENGLISH) - Page 27

Meaning / Solution - problem

Page 27 highlights

Select Languages English Problem Meaning / Solution The tray doesn't open. See if the PC is on. Make sure the power cable within the PC is connected properly. If the tray still won't open with the power-on, turn the power-off and insert a pin(paper clip) into the emergency hole to open. The tray doesn't close. Make sure the disc has been inserted properly. The PC is not working properly. See if the jumper(s) is properly connected to the Master/Slave Selection port. See if the drive is properly connected to the PC. See if the floppy disc remains in the PC. The drive is not working properly. See if the drive is connected properly to the PC. See if the device drive program has been installed properly. The system dosen't read the disc. See if the system detects the drive. Make sure you use the types of discs that are supported by the drive. See if the LED turns into green. Make sure you inserted the disc with the label facing up. Make sure you are using the right program for disc playback. See if the disc is clean. See if any congealing has occurred. Make sure the region code of the drive matches the disc number. You can confirm the use of software at the site of our customer support. Address: www.samsung-ODD.com - See " Support > Download center > Operation Manual ". - See " Information > Flash Manual > Recording Software ".

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Select Languages
English
Problem
Meaning / Solution
The tray doesn't open.
See if the PC is on.
Make sure the power cable within the PC is connected properly.
If the tray still won't open with the power-on, turn the power-off and
insert a pin(paper clip) into the emergency hole to open.
The tray doesn't close.
Make sure the disc has been inserted properly.
The PC is not working properly.
See if the jumper(s) is properly connected to the Master/Slave
Selection port.
See if the drive is properly connected to the PC.
See if the floppy disc remains in the PC.
The drive is not working properly.
See if the drive is connected properly to the PC.
See if the device drive program has been installed properly.
The system dosen't read the disc.
See if the system detects the drive.
Make sure you use the types of discs that are supported by the drive.
See if the LED turns into green.
Make sure you inserted the disc with the label facing up.
Make sure you are using the right program for disc playback.
See if the disc is clean.
See if any congealing has occurred.
Make sure the region code of the drive matches the disc number.
You can confirm the use of software at the site of our customer support.
Address: www.samsung-ODD.com
- See “ Support > Download center > Operation Manual ”.
- See “ Information > Flash Manual > Recording Software ”.
7/2/2008
file://C:₩Documents and Settings₩황 정민₩바탕 화면₩유통향 SH-S222A-투루없음_번...