Samsung SH-W08A User Manual (user Manual) (ver.1.0) (English) - Page 26

Specifications Category DISC Usable Discs Disc Diameter Interface Support Interface Port PIO mode DMA mode ACCESS TIME CD-ROM (Random) DVD-ROM Media Type DVD+R DVD+RW DVD-R DVD-RW Data Transfer DVD-ROM(Single) Speed CD-ROM CD-R US-RW HS-RW CD-RW Buffer Memory Drive Installation Operating Temperature Environment Humidity Size(Width x Height x Length) Weight MTBF SH-W08A DVD R/RW Drive DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM, DVD-Video CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CD-EXTRA, Portforio) 4.72 Inch or 3.15 Inch (120mm or 80mm) ATA/ATAPI (E-IDE) PIO Mode 4: 16.7MB/sec Ultra DMA Mode 2: 33.3MB/sec 110ms (typ) 130ms (typ) Write Read PCAV 8X (Max 16.2MB/sec) CAV 12X (16.2MB/sec) CLV 4X (Max 5.4MB/sec) CAV 8X (10.8MB/sec) PCAV 8X (Max 10.8MB/sec) CAV 8X (10.8MB/sec) CLV 4X (Max 5.4MB/sec) CAV 8X (10.8MB/sec) - CAV 12X (16.2MB/sec) - CAV 40X (6.0MB/sec) PCAV 40X (Max 6.0MB/sec) CAV 40X (6.0MB/sec) PCAV 24X (Max 3.6MB/sec) CAV 32X (4.8MB/sec) CLV 10X (Max 1.5MB/sec) CAV 32X (4.8MB/sec) CLV 4X (Max 0.6MB/sec) CAV 32X (4.8MB/sec) 2MB Horizontal / Vertical (cannot use 3.15 Inch (80mm) discs) 41°F ~ 122°F (5°C ~ 45°C) 10% ~ 80% (RH) 5.83 X 1.65 X 7.24 Inch (148.2 X 42 X 184mm) 880g 125,000 POH(Duty 20%) Note Does not support DVD-R for Authoring, DVD-RAM Cannot playback or record on both sides of a two-sided disc simultaneously. The read/write capacity of the supported discs depends on the condition of the disc and the recording format of the drive. Therefore, the read/write quality may not be perfect. Fcc information to the user This equipment has been tested and found to comply with the limits for a class B digital device. pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates. Uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. Wiich can be determined by tuming the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio TV technician for help. CAUTION Change or modifications not expressly approded by the manufacturer responslble for comliance could void the user's authority to operate the equipment. Laser Standand IEC 60825-1 : 1993 + A1 : 1997 + A2 : 2001 The product specifications above may be changed improve device performance without prior notice.