Samsung SL-C410W User Manual Ver.1.0 (English) - Page 140

Using the NFC feature The NFC(Near Field Communication) printer allows you to directly print from your cell phone just by holding your cell phone over the NFC tag on your printer. It does not require installing print driver or connecting to an access point. You just need NFC supported cell phone. In order to use this feature, Samsung Mobile Print app needs to be installed on your cell phone. • Depending on the material of the cell phone cover, NFC recognition may not work properly. • Depending on the cell phone you are using, the tranmission speed may differ. 26 Printing 1 Check that NFC and Wi-Fi Direct feature are enabled on your cell phone and Wi-Fi Direct feature is enabled on your printer (see "Setting up Wi-Fi Direct" on page 133). 2 Tag the NFC antenna on your cell phone (usually located on the back of the cell phone) over the NFC tag( ) on your printer. Wait few seconds for the Samsung Mobile Print app to start. 25 Requirements • NFC and Wi-Fi Direct enabled, Mobile Print app installed cell phone with Android OS 4.0 or higher. Only Android OS 4.1 or higher will automatically enable the Wi-Fi Direct feature on your cell phone when you enable the NFC feature. We recommend you to upgrade your cell phone to Android OS 4.1 or higher to use the NFC feature. • Wi-Fi Direct feature enabled printer. Wi-Fi Direct feature is enabled by default. • For some cell phones, NFC antenna might not be located at the back of the cell phone. Check the location of the NFC antenna on your cell phone before tagging. • If error message about changed PIN number appears, enter a changed PIN number and press OK. Follow the instruction on the app screen to update the PIN number. • If you do not have Samsung Mobile Print app installed on your cell phone, it automatically connects to Samsung Mobile Print app download page. Download the app and try again. 2. Using a network-connected machine 140