Samsung SMT-1921 User Guide - Page 8

English USER'S MANUAL Remote Controller POWER Turns the Power On or Off. There will be a few seconds delay before display appears. Number button Changes the SYSTEM ID for remote controller. With the SYSTEM ID button pressed, entered the desired NUMBER by pressing the corresponding button(0~9) to set up the Remote Controller ID ID RESET Resets 01(default value) for the remote control ID. VOLUME +, Adjusts the audio volume. MUTE Press to mute the sound temporarily. Displayed on the bottom left of the screen. Press the MUTE button again to cancel the Mute function.Alternatively press the - or + button to cancel the Mute function. UNDER SCAN Displays the entire video signal on the screen. MENU Open the on-screen menu and exit from the menu screen or close screen adjustment menu. ENTER Activates a highlighted menu item. SYSTEM ID Setting the SYSTEM ID of remote controller. Refer to Number button. PIP - Available in VGA Mode Push the PIP button to turn PIP screen On/Off. P.MODE - Available in Video A/B, S-Video Mode Press to select a pre-defined Picture Mode of the monitor or to change the picture atmosphere as required. When you press this button, current mode is displayed on the lower center of the screen. The monitor has four auto matic picture settings that are preset at the factory. Then push button again to circle through available reconfigured modes. ( Dynamic, Standard, Movie, Custom ) FREEZE - Available in Video A/B, S-Video Mode Press the button once to freeze the screen. Press it again to unfreeze. AUTO - Available In VGA mode Only Adjusts the screen display automatically. SOURCE Press the 'SOURCE' button to change the input signal source. Changing the source is allowed only in external devices that are connected to the monitor at the time. buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. -  - 1-AB68-00651A-03eng_0607.indd 7 2007-06-07 오후 7:13:22