Samsung SMT-4011 User Guide - Page 55

4) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable for your eyes depending on your taste. If this is the case, Adjusts the brightness and contrast by using the OSD menu. [The direct button on the remote control is the 'M/B' button.] Custom [MENU ENTER ENTER] ˧ [ENTER ENTER] By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 1) Contrast Adjusts the Contrast. 2) Brightness Adjusts the Brightness. Note • By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Color Tone [MENU ENTER ENTER ENTER] The color tones can be changed. 1) Cool 3) Normal 4) Warm 5) Custom (Available in PC, BNC mode only) Color Control [MENU ENTER ENTER] ˧ [ENTER ENTER] Adjusts the individual R, G, B color controls. (Available in PC, BNC mode only) 1) Red 2) Green 3) Blue Note • If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC, BNC mode only) 1) Coarse [MENU ENTER ENTER] ˧ [ENTER ENTER] Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. 2) Fine [MENU ENTER ENTER ENTER ENTER] Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). 3) Position [MENU ENTER ENTER ENTER ENTER] Adjusts the screen location horizontally and vertically. \[