Samsung SND-460V User Manual - Page 11

Ch3. Installation and Network Setup 4. Please configure according to the network environment where SND-460V network camera will be installed and push button to save the configuration. ① LAN / xDSL/ DHCP Configuration Item Description LAN Use When network product is connected to normal local LAN or when connected to static IP, the network data to be allotted to the IP is configured. xDSL When using xDSL dynamic IP, enter the ID and PW. DHCP When automatically receiving IP through DHCP server, the DHCP functions are activated. 'DHCP' is used in the LAN environment where the DHCP is activated. Generally, for mid/large scale, DHCP servers are operated through LAN and for small-scales, IP sharers use DHCP functions. ② Port Configuration NETWORK CAMERA 20 User's Manual Item Port Setting Description The connection port and http, ftp port configurations can be set here and the DDNS use can be checked. Notes • U se DDNS changes its IP address every time the user attempts to connect to the ISP and when the product is connected to a cable modem or xDSL modem. In this case, the user cannot know the changed IP address. When a product that uses dynamic IP is registered on the DDNS server, when wishing to connect to the product, the changed IP address can be easily recognized. Register the product in the DDNS server in order to register the IP address in the DDNS server. Enable the "Use DDNS" option and enter the submitted ID and password into the server. NETWORK CAMERA 21 User's Manual