Samsung SP-P4231 User Manual (user Manual) (ver.1.0) (English) - Page 69

Notes Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Resolution (Dot X Line) Vertical Frequency(Hz) Horizontal Frequency(KHz) Vertical Polarity Horizontal Polarity IBM PC / AT Compatible 640 X 350 640 X 400 640 X 480 800 X 600 848 X 480 1024 X 768 70.086 85.080 85.080 59.940 72.809 75.000 85.061 56.250 60.317 72.188 75.000 85.061 60.000 72.000 75.000 60.004 70.069 75.029 84.997 31.469 37.861 37.861 31.469 37.861 37.500 43.269 35.156 37.897 48.077 46.875 53.674 29.838 36.072 37.650 48.363 56.476 60.023 63.677 N P N P P N N N N N N N N N N/P N/P P P P P P P P P nVidia chipset N N N N P P P P (N: Negative / P: Positive) • The interlace mode is not supported. • The PDP operates abnormally if a non-standard video format is selected. • This sheet conforms to IBM/VESA regulations and is prepared on the basis of Analog Input. • The DVI Mode is supported same as above table. Notes • When this PDP is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a PDP. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ (horizontal). • In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the TV/VIDEO button on the remote control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected. • Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random signals might appear). 69