Samsung SP-R4232 User Manual (user Manual) (ver.1.0) (English) - Page 37
Notes, When selecting Cable TV
View all Samsung SP-R4232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3 Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select "Start". Notes • If the antenna is connected to ANT 1 IN (CABLE IN), select "Cable" and if it is connected to ANT 2 IN (AIR IN), select "Air". • If both ANT 1 IN and ANT 2 IN are connected, select the "Air + Cable". • If the CableCARD is inserted into the "CableCARD" slot on the rear panel, "Cable" and "Air + Cable" are not available. When selecting Cable TV : Press the ▲ or ▼ button to select "Cable" or "Air + Cable", then press the ENTER button. Plug & Play Select the antennas to memorize. Air Start Cable Start Air + Cable Start Move Enter Skip Plug & Play Select the cable system. Digital Channel Analog Channel Start : STD √ : STD √ Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button. Press the ▲ or ▼ button to select "STD", "HRC", or "IRC", press the ENTER button. Move Enter Skip Plug & Play Select the cable system. Digital Channel Analog Channel Start : SSTTDD : SHTRDC IRC Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER button. Press the ▲ or ▼ button to select "STD", "HRC", or "IRC", press the ENTER button. Press the ▲ or ▼ button to select "Start", then press the ENTER button to memorize the channels. Note • STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory" on page 43. Move Enter Skip Plug & Play Select the cable system. Digital Channel Analog Channel Start : STD √ : SSTTDD HRC IRC Move Enter Skip Plug & Play Select the cable system. Digital Channel Analog Channel Start : STD √ : STD √ Move Enter Skip 37