Samsung SR20H9050U User Manual - Page 7
Before use, In use, Cleaning and, maintenance - disassembly
View all Samsung SR20H9050U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CAUTION Before use ▶▶Insert the dustbin before using POWERbot. ▶▶Open room doors before cleaning in order to have all rooms cleaned and install a Virtual guard in front of entryway, balconies, bathrooms, or other areas where POWERbot may fall. ▶▶Be careful with the followings for proper automatic recharging. -- Always turn on the power of the charger. -- Install the charger where POWERbot can easily find. -- Do not leave any object in front of the charger. ▶▶When installing the charger, do not leave the cord carelessly on the floor since POWERbot may get tangled by it. ▶▶Do not use POWERbot on black colored floors. -- The POWERbot may not be able to operate normally. ▶▶Do not pick up POWERbot by the dustbin holder. ▶▶Do not place any objects within 0.5 m to both sides and 1 m to the front of the charger. ▶▶Make sure the charger's charging contact is not damaged or have any foreign matters on it. ▶▶Do not install the charger in an area with a dark floor. -- If the floor around the charger is dark, recharging is hindered. ▶▶Move any obstacles that may disturb POWERbot's movement (such as children's indoor swing or slides) before cleaning. CAUTION In use ▶▶Using POWERbot on thick carpet may damage both POWERbot and the carpet. -- The POWERbot cannot pass over carpet that is thicker than 1 cm. ▶▶Do not use POWERbot on tables or other high surfaces. -- There is a risk of damage if it falls. ▶▶The POWERbot may bump into chair, desk legs therefore move them away for faster and efficient cleaning. ▶▶When POWERbot is operating, do not lift it up or carry it to another area. ▶▶Do not hold by driving wheels of POWERbot when carrying it to another area. ▶▶Do not put any objects on top of POWERbot since it may cause malfunction. ▶▶Remove any large papers or plastic bags immediately when using POWERbot since they may block the intake. ▶▶Do not aim the red pointer directly at people or animals. CAUTION Cleaning and maintenance ▶▶Prevent any damage to POWERbot by complying the followings. -- Do not clean POWERbot by spraying water directly onto it or use benzene, thinner, acetone or alcohol to clean it. ▶▶Do not disassemble or repair POWERbot. This should only be done by a certified repairman. ▶▶Always keep the obstacle sensor and cliff sensor clean. -- If foreign matter accumulates, sensors may malfunction. ENGLISH-07