Samsung SRD-850D User Manual - Page 48
Remote Devices, POS Devices
View all Samsung SRD-850D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
VTJOHUIF%73 • Duration : Sets the alarm duration for the alarm signal and beep sound. - Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4). - If was selected, a beep will sound. - If was selected, both beep sound and alarm signal through rear side ports will output. M status means that the HDD is operating but it has problems that require technical examination. ( ) appears on the Live screen. status means that the HDD has defect and requires immediate replacement. ( ) appears on the Live screen. 6. When the HDD Alarm setup is done, press . Remote Devices You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR. Using the mouse may help make setup easier. 3. Use the up/down buttons () in window to move to , and press [ENTER] button. 4. Use direction buttons to move to the desired item, and press [ENTER] button. 5. Set the values of each communication setup of the remote device. Remote Device Baudrate Parity 9600 b None b Data 8 b Stop Bit Transfer type 1 b Half Duplex b System Keyboard OFF Remote Control ON ID 00 ID 00 • Baudrate : Baud rate settings of the DVR, PTZ camera and system keyboard should be matched for proper operations. 6. Make sure to match IDs of the DVR, System Keyboard and Remote Control, and press . OK Cancel M For changing the remote control's ID, refer to "Changing the Remote Control ID". (Page 13) POS Devices You can set properties of POS devices connected to the DVR. A POS device connection requires channel, preset, and Port/Ethernet settings. Using the mouse may help make setup easier. 3. Use the up/down buttons () in window to move to , and press [ENTER] button. 4. Use direction buttons to move to a desired item, and set the value. • POS USE : When selected , DVR and POS will be connected. POS Device POS USE POS CH 1 None 2 None 3 None 4 None 5 None 6 None 7 None 8 None J If you change settings for the device and press while the is not checked, the changes for POS device will not be saved. Preset b No preset No preset No preset No preset No preset No preset No preset No preset OK Cancel POS Device Setup Port/Ethernet None None None None None None None None Previous/Next Page 48_ using the DVR