Samsung SSC-1000 User Guide - Page 12
Manipulating the MULTIPLEX - system controller manual
View all Samsung SSC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SSC-1000 (gb) 2009.1.8 1:38 PM Page 20 User's Guide # TOUR action This is a function for putting out the Tour Switching program set up in the matrix switcher on the monitor of your discretion. First, select the monitor you intend to put out, and when you press TOUR+NO.+ENTER, the visuals corresponded to the pertinent Tour program get automatically converted, "TOUR [NO] RUN" get indicated in the LCD. If you press Hold in the tour run state, the automatic conversion actions get stopped, and "TOUR [NO] HOLD" gets indicated in the LCD. If you press the NEXT or BEFORE button in this state, it gets converted to the next visuals or the previous visuals of the visuals being put out presently. If you want to automatically convert again, press the SEQUENCE button. If you want to convert the tour mode to the manual select mode, press CAM+NO.+ENTER. $ SALVO action This is a function for showing camera visuals corresponded to monitor groups in the Salvo program of the matrix switcher to corresponding monitors simultaneously. If you want to select the monitor group salvo that you desire, press SALVO+NO.+ENTER. At this time "SALVO [NO]" gets indicated in the LCD. In this state, if you press Next or Before, it gets converted to the next Salvo No. or the previous Salvo No. All Salvo No modes get consecutively converted and "SALVO [NO] RUN" gets indicated in the LCD. In this state, if you press Hold, it gets fixed to the previous Salvo No mode. For conversion to the manual select mode, press CAM+NO.+ENTER. 5) Manipulating the MULTIPLEX ! Into the multiplex control mode You get into the multiplex control mode by pressing "MUX CONTROL" button. @ How to control "MONITOR OUT" You can control "MONITOR OUT" by pressing "MON" button in the Multiplex control mode and selecting a RS-485 Address value (an odd among 1~253) of the multiplex and pressing "Enter" button. One to one with front panel of the multiplex. (Refer to the 2.Names and Functions of Each Parts) # How to control "SPOT OUT" You can control "SPOT OUT" by pressing "MON" button in the Multiplex control mode and selecting a RS-485 Address value+1 (even among 2~254) and pressing "Enter" button. - "1~16" + "ENTER" : Fixed output of the channel selected. - When you press "HOLD(SEQUENCE)" button, switching screen output. (Switching output according to "SPOT OUT" setup in the Multiplex menu) $ How to escape from the Multiplex control mode. - When you press "MUX CONTROL" button, you escape from the multiplex control mode. - When you press "CAM", you escape from the Multiplex control mode and you can select an address number of the camera. 20 21