Samsung ST200 User Manual - Page 131

Error messages When the following error messages appear, try these remedies. Error message Card Error Card not supported. Connection failed. DCF Full Error Suggested remedies • Turn off your camera, and then turn it on again. • Remove your memory card, and then insert it again. • Format your memory card. The inserted memory card is not supported by your camera. Insert a microSD, microSDHC, or microSDXC memory card. • The camera cannot connect to the network using the selected access point. Select another AP and try again. • The camera has failed to connect to the other camera. Try connecting again. File names do not match the DCF standard. Transfer the files from the memory card to your computer and format the card. Then, open the Settings menu and select File No. → Reset. (p. 127) Error message Suggested remedies Device disconnected. File Error Network connection disconnected while transferring photos. Select a TV Link device again. Delete the damaged file or contact a service center. File system not supported. Your camera does not support the FAT file structure of the inserted memory card. Format the memory card on the camera. Initialization failed. Invalid password. • Turn on TV Link enabled devices on the network. • The camera has failed to locate a TV Linkenabled device. The password for transferring files to another camera is wrong. Enter the correct password again. Low Battery Insert a charged battery or recharge the battery. Memory Full Delete unnecessary files or insert a new memory card. Appendixes 130