Samsung TL110 User Manual (user Manual) (ver.1.1) (English) - Page 13

Connecting to a Power Source - battery

Page 13 highlights

Connecting to a Power Source You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera. Ê BP70A rechargeable battery Specification Model BP70A Type Lithium lon Capacity 740mAh Voltage 3.7V Charging time Approximately 150 Minutes Ê Number of images and battery life: Using the BP70A Battery life / Number of images Conditions Using the fully charged battery, Default settings, Program mode, Shot to shot interval: 30Sec. Still image Approx. 100 MIN / Approx. 200 shots Changing the zoom position between the Wide and the Tele after every shot. Using the flash on every second shot. Using the camera for 5 minutes and then powering it off for 1 minute. Movie Using the fully charged battery Approx. 80 MIN 640x480 image size 30 fps frame rate Ä These figures are measured under Samsung's standard conditions and shooting conditions and may vary depending on the user's methods. 12 Important information about battery usage. å When camera is not in use, turn off the power. å Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. å Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. å Batteries will usually recover at normal temperatures. å During extended use of the camera, the camera body may become warm. This is perfectly normal. Ê If you connect the AC adapter to the USB cable, you can use it as an AC cable and recharge the spare battery with it. - Using an AC cable : Connect the AC adapter to the USB cable. It can be used as a power cable. - Using a USB cable : Remove the AC adapter.You can download stored images to your PC (p.100) or supply the power to your camera through the USB cable.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109

12
Connecting to a Power Source
²
BP70A rechargeable battery Speci
cation
Model
BP70A
Type
Lithium lon
Capacity
740mAh
Voltage
3.7V
C
harging time
Approximately 150 Minutes
You should use the rechargeable battery BP70A supplied with the
camera. Be sure to charge the battery before using the camera.
²
Number of images and battery life: Using the BP70A
Battery life /
Number of images
Conditions
Still image
Approx. 100 MIN /
Approx. 200 shots
Using the fully charged battery,
Default settings, Program mode,
Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the
ash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
Movie
Approx. 80 MIN
Using the fully charged battery
640x480 image size
30 fps frame rate
Ä
These
gures are measured under Samsung’s standard conditions
and shooting conditions and may vary depending on the user’s
methods.
Important information about battery usage.
±
When camera is not in use, turn off the power.
±
Please remove the battery if the camera will not be used
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
±
Low temperatures (below 0°C) can affect the performance
of the battery and you may experience reduced battery life.
±
Batteries will usually recover at normal temperatures.
±
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
²
If you connect the AC adapter to the USB cable, you can use it
as an AC cable and recharge the spare battery with it.
- Using an AC cable
: Connect the AC adapter to the
USB cable. It can be used as a
power cable.
- Using a USB cable
: Remove the AC adapter.You can
download stored images to your
PC (p.100) or supply the power
to your camera through the USB
cable.