Samsung TWMB1900 Setup Guide - Page 3
Installing
View all Samsung TWMB1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installing Remove the stand from the monitor. Mark the locations of the four (4) holes of the wall mount on the wall. Drill the marked locations to a depth of 35 mm using a drill with a diameter of 6.0mm. ⒜ ⒝ 4EA 4EA Fix the anchors (a) into each hole on the wall using a hammer. Fit the holes of the wall mount to those of the anchors and insert the screws (b) into the fitted holes. A Connect the cable before fixing the monitor onto the wall mount. Fix part A of the wall mount to the groove of the stand at the bottom of the monitor. Caution: Make sure to install the wall mount onto a wall that is sufficiently strong. If you install the wall mount onto a wall made of gypsum board or wood, the product may fall because the wall cannot support the product. English