Samsung TX-P2775H User Manual (user Manual) (ver.1.0) (English) - Page 19
Connecting an S-VHS VCR, Connecting a Second VCR to Record from the TV
View all Samsung TX-P2775H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
INSTALLATION Connecting an S-VHS VCR Your TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1-3 in the previous section to connect the antenna or cable to your VCR and your TV. TV Rear Panel 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO IN 1 jacks on the TV. 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO jack on the TV. An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.) Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR. (The VCR input jacks might be either on the front or on back of the VCR.) TV Rear Panel 2 Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR. Refer to your VCR's instructions for more information about how to record using this kind of connection. 19