Samsung TX-P3075WH User Manual (user Manual) (ver.1.0) (English) - Page 18
Connecting a VCR, Ferrite Core
View all Samsung TX-P3075WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 14~17). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. TV Rear Panel 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks (AV1~AV3) on the TV. If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack (AV1~AV3) on the TV. Follow the instructions in "Viewing an External Signal Source" to view your VCR tape. Ferrite Core The ferrite core is used to attenuate undesired signals. When connecting cables, attach the ferrite core to the cable near the connector. TV Rear Panel 18