Samsung TX-T2782 User Manual (user Manual) (ver.1.0) (English) - Page 9

Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control. The message Start Plug & Play is displayed. Press the ENTER button, then the Language menu is displayed. 2 Press the ▲ or ▼ button to select the desired language, then press the ENTER button. The message Select Home Mode when installing this TV at home. is displayed. 3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button. The Check antenna input. menu is displayed. ➢  The default selection is Home.  We recommend setting the TV to Home mode for the best picture in your home environment.  Shop mode is only intended for use in retail environments.  If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volune button and then hold down the MENU button for five seconds on the TV panel. 4 Make sure that an antenna is connected to the TV. Press the ENTER button, then the Antenna menu is displayed. 5 Press the ▲ or ▼ button to select the desired connection. Press the ENTER button to memorize the channels of the selected connection. 6 Press the ENTER button to start. First analog, then digital channels will be memorized. When selecting Cable TV: 7 Press the ▲ or ▼ button to select Cable, then press the ENTER button. The Cable System menu is displayed. 8 Press the buttons to select the cable system for analog and digital channels respectively, then press the ENTER button. 9 Press the ENTER button to start. The TV begins memorizing all available channels. Press the ENTER button to stop. After all available channels are stored, the Clock Set menu is displayed. ➢ When you select Cable or Air+Cable, it also executes "Clearing Scrambled Channels" simultaneously. See page 15. 10 Press the ◄ or ► button to move to the hour or minute. Set the clock by pressing the ▲ or ▼ button, then press the ENTER button. 11 The message Enjoy your watching. is displayed. When you have finished, press the ENTER button. ➢ Even if the ENTER button is not pressed, the message will automatically disappear after several seconds. If you want to reset this feature... 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ENTER button to select Plug & Play. For further details on setting up options, refer to the top of this page. ➢ The Plug & Play feature is only available in TV and DTV mode. Plug & Play Start Plug & Play OK Enter Exit Plug & Play Language English Español Français Move Enter Skip Plug & Play Select Home Mode when installing this TV at home. Shop Home Move Enter Skip Plug & Play Auto Program Air Cable Air+Cable Move Enter Skip Plug & Play Auto Program Cable System Start Analog STD HRC IRC Digital STD HRC IRC Move Enter Skip Plug & Play Auto Program in progress STD 120 3% Stop Enter Skip Scrambled Channels Searched Plug & Play Clock Set -- : -- am Move Enter Skip Enjoy your watching. OK English - 9