Samsung TXN2034F User Manual (user Manual) (ver.1.0) (English) - Page 17
Connecting to a Cable Box that Descrambles All Channels, Connecting to a Cable Box that Descrambles
![]() |
View all Samsung TXN2034F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. w This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT". 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.) 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box. w This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". 2 Connect this cable to a two-way splitter. 3 Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box. 2.3 CHAPTER TWO: INSTALLATION
![](/manual_guide/products/samsung-txn2034f-user-manual-user-manual-ver10-english-0113a64/17.png)