Samsung UN40EH5050F User Manual Ver.1.0 (English) - Page 14
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology - wall mount
View all Samsung UN40EH5050F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
There is no picture/video. RF (Cable/Antenna) Connection • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices). • Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the correct input source by pressing the SOURCE button on the remote control. • Reboot the connected device by reconnecting the device's power cable. The TV is not receiving all channels. No Caption on digital channels. • Make sure the coaxial cable is connected securely. • Run Auto Program to add available channels to the channel list. go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and IRC) • Verify the antenna is positioned correctly. • Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1. • Some channels may not have caption data. The picture is distorted: macroblock, error, small block, dots, pixelization. Others • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in sports and action movies. • A weak signal can cause picture distortion. This is not a TV problem. Purple/green rolling horizontal bars and • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the setbuzzing noise from the TV speakers with top-box has a grounding issue. Replace the Component video cables with an HDMI connection. Component cable connection. The picture will not display in full screen. The remote control does not work. The cable/set top box remote control does not turn the TV on or off, or adjust the volume. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the TV. • Adjust the picture size option on your external device or change the TV to full screen. • Replace the remote control's batteries. Make sure you insert them with the polarity (+/-) correct . • Clean the transmission window located on the top of the remote control. • Try pointing the remote directly at the TV from 5~6 feet away. • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the SAMSUNG TV code. A "Mode Not Supported" message appears. • Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution settings in this manual. Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component. • Caption must be activated on the external device. There is a plastic smell from the TV. TV Signal Strength is unavailable in the Self Diagnosis Test menu. TV is tilted to the right or left side. • This smell is normal and will dissipate in a few days. • This function is only available for digital channels received through an Antenna / RF/Coax connection. • Remove the stand base from the TV and reassemble it. The Channel menu is grey out (unavailable). • The Channel menu is only available when you select the TV source. Your settings are lost after 30 minutes or • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product's design and is not a defect. POP (TV's internal banner ad) appears on the screen. • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup). ✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ✎✎ Watch these troubleshooting on video at www.samsung.com/spsn. ✎✎ Some functions and pictures shown in this manual are available on specific models only. ✎✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com → Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu. - 14 -