Samsung UN40H6203AF Installation Guide Ver.1.0 (English) - Page 6
STB Control
View all Samsung UN40H6203AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5 STB Control You can control your set-top-box or satellite box with the Remote Control. To establish control, you must first set up the IR extender cable. If you don't have an STB, skip this section. 1 Connect the IR extender cable to the TV's IR output connector. IR Out Connect the IR Extender Cable here. Place the transmitter end within 4 inches of the set-top-box's remote control sensor. 2 Position the transmitter end within 4 inches (10 cm) of the set-top-box's remote control sensor, pointing in the direction of the sensor. Make sure there are no obstacles between the transmitter end of the IR extender cable and the settop-box or satellite box. Any obstacles will interfere with the transmission of the remote control signals. 3 Finalize control of your set-top or satellite box when you run Initial Setup. [UH6203-QSG]BN68-06331A-00ENG.indb 6 2014-05-09 1:01:27