Samsung UN46B8500 User Manual (ENGLISH) - Page 67
Troubleshooting for Anynet+, Problem, Possible Solution, Media Play, Plug & Play, Anynet, HDMI-CEC
UPC - 036725230378
View all Samsung UN46B8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
¦ Troubleshooting for Anynet+ Problem Anynet+ does not work. ● ● ● ● ● ● ● ● ● ● I want to start Anynet+. ● ● I want to exit Anynet+. ● ● ● The message 'Connecting to ● Anynet+ device...' appears on the screen. ● The Anynet+ device does not ● play. The connected device is not ● displayed. ● ● ● ● ● The TV program cannot be ● recorded. The TV sound is not output ● through the receiver. Possible Solution Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver (home theater). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device's Video/Audio/HDMI 1.3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesn't work in certain situations. (Searching channels, Operating Media Play, Plug & Play, etc.) When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. Select View TV in the Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press z, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when Plug & Play is in progress. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI 1.3 cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions. If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. Check whether the antenna jack on the recording device is properly connected. Connect the optical cable between TV and the receiver. [8500-NA]BN68-02322C-Eng.indb 65 English - 65 2009-07-28 �� 11:23:48