Samsung UN46C5000QF Quick Guide (easy Manual) (ver.1.0) (English) - Page 2

Remote Control Buttons and Functions ✎✎This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons. Turns the TV on and off. Displays and selects the available video sources. POWER ON/OFF SOURCE Press to directly access channels. Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel "54-3", press "54", then press "-" and "3". Adjusts the volume. Brings up the OSD. Views Media Play (USB). Quickly select frequently used functions. PRE-CH MEDIA.P CH LIST MENU FAV.CH TOOLS INFO Returns to the previous menu. Buttons used in the Channel list, Media Play (USB) menu, etc. RETURN EXIT A B CD S.MODE SLEEP MTS P.MODE P.SIZE CC Use these buttons in Media Play (USB) and Anynet+ (HDMI-CEC) modes. (�: Controls recording on Samsung recorders that have the Anynet+ feature) POWER ON/OFF SOURCE Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.) Returns to the previous channel. Cuts off the sound temporarily. Changes channels. Displays the channel list on the screen. Displays Favorite Channel Lists on the screen. Displays information on the TV screen. Selects the on-screen menu items and changes the values seen on the menu. Exits the menu. S.MODE: Press to select the sound mode. SLEEP: Automatically shuts off the TV at a preset time. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). P.MODE: Press to select the picture mode. P.SIZE: Selects the picture size. CC: Controls the caption decoder. POWER ON/OFF Changing Channels and Adjusting the Volume SOURCE PRE-CH Adjust the volume by pressing the Volume button Change the channels by pressing the Channel button on the remote. on the remote. CH LIST ✎✎If your TV is attached to a cable or satellite box, change the channel using MENU MEDIA.P FAV.CH the box's remote. ✎✎You can also change the channels by pressing the z TOOLS button oPRInNEF-OtChH e front panel of your TV and adjust the volume by pressing the y button. Viewing the On Screen Menus RETURN CH LIST EXIT To view the On Screen Menus, follow these steps: 1. Turn on your TV, press the MENU button on your MENU MEADIA.P B C FAVD.CH remote. The main menu appears. ST.OMODLES SLEEP MINTFSO The menu's left side has the following menu P.MODE P.SIZE CC options: Picture, Sound, Channel, Setup, Input, Application, and Support. 2. Press the ▲ or ▼ button on your remote to select a menuREToURpNtion, and thEXeITn press the ENTERE button. A B CD 3. When done using the menu, press the EXIT button on your remote to exit. S.MODE SLEEP MTS Selecting a Source P.MODE P.SIZE CC To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct POWER ON/OFF source. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or a cable TV SOURCE input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time you press the SOURCE button, you change to a different source. PRE-CH Using Auto Motion Plus Auto Motion Plus 120Hz™ technology virtually eliminates any blur in video that include fast motion such as sports and action movies. To activate Auto Motion Plus, follow these steps: 1. Turn on your TV, press the MENU button on your remote, then select Picture Options → Auto Motion Plus 120Hz. 2. Select the Auto Motion Plus 120Hz setting you want. ✎✎ If noise occurs on the screen, please set up the Auto Motion Plus 120Hz to Off. If Auto Motion Plus 120Hz is Custom, you can set up the Blur Reduction, Judder Reduction or Reset manually. ✎✎ If Auto Motion Plus 120Hz is Demo, you can compare the difference of on and off modes. 3. Press the RETURN button on your remote when done. Step 6: The Internet@TV and Media Play Features Your TV's Internet@TV feature lets you connect to an ever-expanding portal of your favorite on-line digital content. Customizable widgets give you access to Blockbuster, Facebook, YouTube, Flickr, Netflix* and more - all on your HDTV. The Media Play feature lets you connect to your PC through your home network and stream PC audio and video files to your HDTV using your remote. To use IPTV or Samsung PC Share Manager, you must connect your TV to your network. You can attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung Wireless LAN Adapter. Instructions for both connection methods are below. Network Connection - Wired There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below: The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) TV Rear Panel Modem Cable (Not Supplied) LAN Cable (Not Supplied) The LAN Port on the Wall TV Rear Panel LAN Cable (Not Supplied) Configuring the Network Connection - Wired Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don't have to enter them manually. To configure your network connection for a network that uses DHCP, follow these steps: Network Setup Internet Protocol Setup : Auto r IP Address : Subnet Mask : Gateway : DNS DNS Server : Auto : U Move E Enter R Return 1. Connect your TV to your network as shown in one of the illustrations above. 2. Turn on your TV, press the MENU button on your remote, and then select Setup → Network. 3. Set the Network Type to Wired if it is not already set to Wired. 4. Select Network Setup. The Network Setup screen appears. 5. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. Auto acquires and enters the necessary internet values automatically. 6. Select Network Test to check Internet connectivity. ✎✎Some networks are Static IP networks. If your network is a Static IP network, you can not use DHCP to configure the network connection. Instead, you must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually. For instructions explaining how to configure a Static IP network, see your user's manual. Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN Adapter" (WIS09ABGN - sold separately) to either the USB1 (HDD) or USB2 port on the back of your TV. See the illustration below. TV Side Panel The LAN Port on the Wall Wireless IP sharer Samsung Wireless LAN Adapter or LAN Cable (Not Supplied) Samsung's Wireless LAN adapter supports the IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, and IEEE 802.11N wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11N. Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless modem or router) to transmit an encrypted security code called an access key. FWhen connecting Samsung Wireless LAN Adapter to TV in 802.11N mode, WEP/ TKIP/TKIP-AES is not supported. Configuring the Network Connection - Wireless The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user's manual for configuration instructions. To configure your network connection for a network that uses DHCP, follow these steps: 1. Connect your TV to your network as shown in the illustrations above. 2. Turn on your TV, press the MENU button on your remote, and the select Setup → Network. 3. Set the Network Type to Wireless if it is not already set to Wireless. 4. Select Network Setup. The Network Setup screen appears. 5. On the Network Setup menu, select an AP(Access Point) and ad hoc network. if you have selected network with a security key, the Security Key screen appears. 6. Enter the security key using the numbers on the remote, and then press the Blue button on your Network Setup Select a network : Not Selected r Internet Protocol Setup : Auto IP Address : Subnet Mask : Gateway : DNS DNS Server : Auto : remote. ✎✎ If your network uses WEP U Move E Enter R Return security encryption, 0~9 and A~F will be available on the Security Key screen. Use the Direction button on your remote to move to the characters and the enter key to select them. 7. On the Network Setup menu, set Internet Protocol Setup and DNS Setup to Auto. The Auto acquires and enters the necessary internet values automatically. 8. Select Network Test to check internet connectivity. ✎✎For more information, see your user's manual. Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. For MediaPlay Media Play operating instructions, please see Videos your Owner's Manual. SUM Change Device View Devices E Enter R Return MEDIA.P CH LIST MENU FAV.CH BN68-02629A-01