Samsung UN46EH5000F User Manual Ver.1.0 (English) - Page 4

Channel Menu ❑❑ Managing Channels Channel List ❑❑ Memorizing Channels When you first set up your TV using Plug & Play, the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List. The Antenna and Auto program functions described below let you re-run the channel memorization function without having to re-run the Plug & Play procedure. Antenna (Air / Cable) Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. Select Menu >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to the Auto Program function. ✎✎ Selecting the signal source using the Antenna function also determines the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture. Auto Program The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List. To start Auto Program, follow these steps: 1. Push MENUm → Channel → Auto Program → ENTERE on your remote. The Antenna Source screen appears. 2. On the Antenna Source screen, select the source of your TV signal. Air If your TV is connected to an antenna choose Air, and then press ENTERE. The TV will automatically start memorizing channels. Cable If your TV is connected to a cable outlet, choose Cable, and then press ENTERE. Go to Step 3. Auto See your list of Added channels, Favorite channels, or channels you've scheduled for viewing. Add or delete Favorite channels, add or delete channels from the Added Channels list, schedule channels or programs for viewing. Watch a channel by selecting the channel in the All Channels, Added Channels, or Favorite screen, pressing the ▲ / ▼ buttons, and then pressing the ENTERE button. Added Channels 6 Air 6-1 ♥ TV #6 7-1 ♥ TV #7 8 Air 9 Air 9-1 ♥ TV #9 10 Air 10-1 ♥ TV #10 11-1 ♥ TV #11 Air ' Zoom ' Select T Tools ► Next Program Channel List Screens icons are listed on the left side. Select an icon using the ▲/▼ buttons to view each list. ■■ All Channels: Shows all currently available channels including those you deleted from the Added Channels list. ■■ Added Channels: Shows all Added Channels. These are the channels that appear when you press the CH button. ■■* Favorite: Shows all favorite channels. ■■ Programmed: Shows all channels and programs currently scheduled using Timer Viewing. ✎✎ Remote control buttons active on the Channel List screen. xxGreen (Zoom): Enlarges or shrinks a channel number. xxYellow (Select): Move the cursor to a channel. Press the Yellow button to select the channel. A c mark appears. Repeat to select additional channels. Then, open the Tools menu and apply a function to the channels you selected. xxT (Tools): Displays the Channel List Tools menu. (The Tools menus may differ depending on the situation.) Display Icons Used in the Channel List Screens If you choose Auto, and then press ENTERE, the TV will automatically select the correct Antenna source. Go to Step 3. 3. On the Cable Type screen, use the buttons to select the type of digital and analog cable systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Start, and then press ENTERE. The TV will start memorizing channels. ✎✎ Channel memorization can take up to 45 minutes, depending on your cable system. ✎✎ Memorized channels are added to the Added Channels list. These are the channels you will see when you use the Channel buttons on your remote. Clear Scrambled Channel This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. ✎✎ Press the ENTERE button to stop the Clear Scrambled Channel. ✎✎ This function is only available in Cable mode. Icons c * ) ( Meaning A selected channel. A Favorite channel. A reserved program. A program currently being broadcast. ❑❑ The Channel List Tools Menu t The Channel List Tools menu contains most of the functions you can use on the All Channel, Added Channels, and Favorite List screens. To view, select a list screen, select a channel, and then press the TOOLS button. ■■Add / Delete: Delete a channel from or add a channel to the Added Channels list. To delete channels from the Added Channels list, follow these steps: 1. Select one or more channels in the Added Channels list using the ▲/▼ buttons and the Yellow Select button on your remote. 2. Press the TOOLS button on your remote. The Tools menu appears. 3. Select Delete in the Tools menu, and then press the ENTERE button. - 4 -