Samsung UN50EH5000F User Manual Ver.1.0 (English) - Page 6
Setup Menu
View all Samsung UN50EH5000F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
■■Information: Display the information for a show or channel you have scheduled. You can also change the schedule Information. 1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTERE button. 2. On the Programmed List screen, select the show or channel entry you want information for, and then press the TOOLS button. The Tools Menu appears. 3. Select Information, and then press the ENTERE button. The Time Viewing Information screen appears. 4. Select Change Info and press the ENTERE button to change information, or select Close and press the ENTERE button to close the Information screen. ■■Select All / Deselect All: You can select or deselect all channels in the channel list. ❑❑ Other Channel Menu Functions Channel Mode (Added Channels/Favorite Channels) Lets you select the channel list displayed when you press the (Channel) button on your remote. For example, if you select Favorite Channels, you will only see Favorite channels when you press the button. Fine Tune Analog channels only. If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. ✎✎ Select the channel, and then select Fine Tune. ✎✎ Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. ✎✎To reset fine-tuning, select the channel, select Fine Tune, and then select Reset on the Fine Tune screen. Setup Menu Plug & Play Lets you re-run the Plug & Play initial setup procedure. For instructions, see your Quick Start Guide. Language Set the menu language. ✎✎ Choose between English, Español, and Français. ❑❑ Setting the Time Time ✎✎ The time you set will appear when you press the INFO button. ■■Clock: Set the clock so you can use the various timer features of the TV. ✎✎ If you disconnect the power cord, you have to set the clock again. To set the clock, follow these steps: 1. Select Setup >Time > Clock. 2. Press ENTERE and select Auto or Manual, and then press ENTERE again. If you selected Auto: The TV will automatically download the correct time from a digital channel. • Select Time Zone, and then press the ENTERE button. Use the▲/▼ buttons to select your Time Zone, and then press ENTERE. • Select DST (Daylight Savings Time), and then press ENTERE. Select On if you want to turn the DST adjustment on and off manually. Select Off to turn off the DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Press ENTERE when done. ✎✎ DST and Time Zone function are only available when the Clock Mode is set to Auto. If you selected Manual: The Clock Set screen appears. Use the ▲/▼ buttons to change the values in each field or use the number buttons to enter the values directly. Use the ◄/► buttons to move from field to field. When done with all the fields, press ENTERE. ✎✎ Available only when Clock Mode is set to Manual. ■■Sleep Timer t Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). ✎✎ To cancel the Sleep Timer, select Off. Timer 1 / Timer 2 / Timer 3 Turns the TV on and off automatically at times and days you select. You can set three different on/off timer settings. ✎✎ You must set the clock first. ■■On Time / Off Time: Set the hour, minute, am/pm, and Activate/Inactivate fields for the On Time and Off Time. Use the ◄/► buttons to move from field to field. Use the ▲/▼ buttons to change the values in each field. To activate the timer with the setting you have chosen, set the Activate/Inactivate field to Activate. ■■Volume: Set the desired loudness. ■■Contents: To select what will be turned on when the timer setting is activated. You can set the TV to turn on a specific channel or play back contents such as photo or audio files. Use the ◄/► buttons to move to move to the Contents field, and then press the ENTERE button. The Contents screen appears. Use the ◄/► buttons to move from field to field. Use the ▲/▼ buttons to change the values in each field. - TV/USB: Select TV or USB. The USB device must be connected to your TV before you can select USB. - Antenna: Displays the current antenna source, Air or Cable. - Channel: If you have selected TV, select the desired channel. - Music/Photo: If you have selected USB, follow these steps to select a folder containing MP3 (Music) or JPEG (Photo) files on the USB device: ✎✎ The maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000. ✎✎ The media may not be playing smoothly when using the device lower than USB 2.0. 1. Use the ◄/► buttons to move to the field under Music or the field under Photo, and then press the ENTERE button. The TV displays a single folder (the Root folder) and the type or name of the device. - 6 -