Samsung UN50F5500AF User Manual Ver.1.0 (English) - Page 168
Receiver, System, Anynet+ HDMI-CEC, Setup, View TV, Source
View all Samsung UN50F5500AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Anynet+ (HDMI-CEC) There is something wrong with the TV. Anynet+ does not work. Try this! Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Only one external device may be connected to Receiver. Check if the power cord of the Anynet+ device is properly connected. Check the cable connections of the Anynet+ device. Navigate to the System menu and verify that Anynet+ (HDMI-CEC) is set to On. Check whether the TV remote control is in TV mode. Check whether the remote control is Anynet+ compatible. Anynet+ may not function under certain circumstances. (Searching channels, operating Smart Hub or Setup, etc.) If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn your TV off and on. I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and then navigate to the System menu to see if Anynet+ (HDMI-CEC) is set to On. After checking, press TOOLS button, select Anynet+ (HDMI-CEC) and then choose a device. I want to exit Anynet+. Select View TV from the Anynet+ menu. Select a non-Anynet+ device from Source. The message "Connecting to Anynet+ device..." or "Disconnecting from Anynet+ device" appears on the screen. You cannot use the remote control when you are configuring Anynet+ or switching to a viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or has switched to a viewing mode. The Anynet+ device won't play. You cannot use the play function when Setup is progress. The connected device is not displayed. Check whether the device supports Anynet+. Check whether the HDMI cable is properly connected. Navigate to the System menu and verify that Anynet+ (HDMI-CEC) is set to On. Scan for Anynet+ devices again. Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+. If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please scan for the device again. The TV audio is not being played through the receiver. Connect an optical cable to the TV and the receiver. ARC enables digital sound to be output via the HDMI (ARC) port. However, ARC is only available when the TV is connected to an audio receiver that supports ARC.