Samsung UN55C7100WF Quick Guide (easy Manual) (ver.1.0) (English) - Page 2
Step 7, Step 6 - hdmi no signal
View all Samsung UN55C7100WF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Step 6: Remote Control Remote Control Buttons and Functions Turns the TV on and off. Displays and selects the available video sources. Press to directly access channels. POWER ON/OFF SOURCE Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel "54-3", press "54", then press "-" and "3". Adjusts the volume. Brings up the OSD. Displays the Content View, which includes Channel List, Internet@TV, Media Play, AllShare and 3D. Quickly select frequently used functions. Returns to the previous menu. Buttons used in the Channel List, Internet@TV, Media Play menu, etc. Use these buttons in Media Play and Anynet+ (HDMI-CEC) modes. (�: Controls recording on Samsung recorders that have the Anynet+ feature) PRE-CH MUTE CH LIST CONTENT MENU INTERNET @ TV TOOLS INFO RETURN EXIT A B C D MEDIA.P YAHOO! FAV.CH P.SIZE CC SOURCE Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.) Returns to the previous channel. Cuts off the sound temporarily. Changes channels. Displays channel list on the screen. Link to various internet services. Displays information on the TV screen. Selects the on-screen menu items and changes the values seen on the menu. Exits the menu. MEDIA.P: Displays Media Play. YAHOO!: Runs the Yahoo widget. : Sets the 3D mode. FAV.CH: Displays Favorite Channel Lists on the screen. P.SIZE: Selects the picture size. CC: Controls the caption decoder. SOURCE Changing Channels and Adjusting the Volume PRE-CH Adjust the volume by pressing the Volume button on the remote. MUTE CH LIST PRE-CH Change the channels by pressing the Channel button on the remote. ✎✎If your TV is attached to a cable or satellite box, change the channel using the box's remote. ✎✎You can also change the channels by pressing the z CONTENT bMuEtNtUon MUTE oINTnE@RNtEhT e front panel of your TV and adjust the volume by pressing the y button. Viewing the On Screen Menus TOOLS INFO CH LIST Selecting a Source To view the On Screen Menus, follow these steps: 1. Turn on your TV, press the MENU button on your RETURN CONTENT MENU INETEXRITNET @ remote. The main menu appears. The menu's left side has the following menu TAOOLS B C INFDO options: Picture, Sound, Channel, Setup, Input, ApplicaMEtDioIA.nP , aYnAHdOOSupp3Dort. 2. Press the ▲ or ▼ button on your remote to select a menuREoTUpRtNion, and thEXeITn press the ENTERE button. FAV.CH P.SIZE CC 3. When done using the menu, press the EXIT button on yourA remoBte toC exitD. MEDIA.P YAHOO 3D To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/DVD SOURCE player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time you press the SOURCE button, you change to a different source. PRE-CH FAV.CH P.SIZE CC MUTE CH LIST CONTENT MENU INTERNET @ TOOLS INFO RETURN EXIT A B CD MEDIA.P YAHOO 3D FAV.CH P.SIZE CC Step 7: The Internet@TV and Media Play Features Your TV's Internet@TV feature (IPTV) lets you connect to an ever-expanding portal of your favorite on-line digital content. Customizable widgets give you access to Blockbuster, Facebook, YouTube, Flickr, Netflix* and more - all on your HDTV. The Media Play feature lets you connect to your PC through your home network and stream PC audio and video files to your HDTV using your remote. To use IPTV or Samsung PC Share Manager, you must connect your TV to your network. You can attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung Wireless LAN Adapter. Instructions for both connection methods are below. Network Connection - Wired There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below: The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) TV Rear Panel Modem Cable (Not Supplied) The LAN Port on the Wall LAN Cable (Not Supplied) LAN Adapter (Supplied) TV Rear Panel LAN Cable (Not Supplied) LAN Adapter (Supplied) Configuring the Network Connection - Wired Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don't have to enter them manually. To configure your network connection for a network that uses DHCP, follow these steps: Network Setup Internet Protocol Setup : Auto r IP Address : Subnet Mask : Gateway : DNS DNS Server : Auto : U Move E Enter R Return 1. Connect your TV to your network as shown in one of the illustrations above. 2. Turn on your TV, press the MENU button on your remote, and then select Setup → Network. 3. Set the Network Type to Wired if it is not already set to Wired. 4. Select Network Setup. The Network Setup screen appears. 5. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. Auto acquires and enters the necessary internet values automatically. 6. Select Network Test to check Internet connectivity. ✎✎Some networks are Static IP networks. If your network is a Static IP network, you can not use DHCP to configure the network connection. Instead, you must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually. For instructions explaining how to configure a Static IP network, see your user's manual. Starting Internet@TV To view the On Screen Menus, follow these steps: Recommended 1. Turn on your TV, press the MENU button on your remote, then select Application → Content View. My Applications by Date 1/1 2. Press the ◄ or ► button to select Samsung Apps Settings Internet@TV, then Login Mark as Favorite Sort by R Return press the ENTERE button. The USER TERMS and PRIVACY POLICY windows appears, then select Yes. 3. Follow the directions on your screen to set up Internet@TV. For detailed instructions, see your Owner's Manual. ✎✎For best Internet@TV results, your broadband company should provide sustained download speeds of 3.5 mb/sec or more. Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB 1 (HDD) or USB 2 port on the back of your TV. See the illustration below. The LAN Port on the Wall Wireless IP Sharer (AP having DHCP Server) TV Rear Panel Samsung Wireless LAN Adapter or LAN Cable (Not Supplied) Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung's Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play smoothly. Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer) to transmit an encrypted security code called an access key. If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. Configuring the Network Connection - Wireless The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user's manual for configuration instructions. To configure your network connection for a network that uses DHCP, follow these steps: 1. Connect your TV to your network as shown in the illustrations above. 2. Turn on your TV, press the MENU button on your remote, and the select Setup → Network. 3. Set the Network Type to Wireless if it is not already set to Wireless. 4. Select Network Setup. The Network Setup screen appears. 5. On the Network Setup menu, select an AP (Access Point) or ad Network Setup hoc network. if you have selected Select a Network : Not Selected r a network with a security key, the Internet Protocol Setup : Auto Security Key screen appears. IP Address : 6. Enter the security key using the Subnet Mask : numbers on the remote, and then Gateway : press the Blue button on your DNS : Auto remote. DNS Server : ✎✎ If your network uses WEP PBC(WPS) U Move E Enter R Return security encryption, 0~9 and A~F will be available on the Security Key screen. Use the Direction button on your remote to move to the characters and the enter key to select them. 7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. The Auto acquires and enters the necessary internet values automatically. 8. Select Network Test to check internet connectivity. ✎✎For more information, see your user's manual. Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. For Media Play operating instructions, please see your Owner's Manual. MediaPlay Videos SUM Change Device View Devices E Enter R Return BN68-03152A-01